1957 Cadillac Factory Shop Manual on CD-ROM. Covers all models. Original manual scanned to digital format. Click Here for more info. Includes the following books:

1. 1957 Cadillac Factory Shop Manual - covers all models ex. Brougham
2. 1958 Cadillac Shop Manual Supplement - covers all models ex. Brougham
3. 1946 - 1958 Cadillac Parts Book
4. 1956 - 1965 Cadillac Parts Book

PART #SM-57CA
$47.99 ea.

Cushion, Engine Support, Rear on Transmission (Transmission Mount) . Replaces original GM part #3631552. Re-vulcanization service only - core required. Allow 4 weeks for service.

• All models

Motor Mount. Replaces original GM part #1467058 & #1480098.

• All models

PART #05-001X
$45.00 / pair

Gasket, Headlight Body Mounting Rubber. 8-1/2" Outside diameter, 1/8" thick. Replaces original GM part #1443915 & #1453486.

• All models

PART #06-001P
$25.00 / pair

Grommet, Radiator Shroud. For headlight, turn signal, and horn wires. Replaces original exactly.

• All models

PART #06-001G
$31.00 ea.

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch. 1-1/4" Outside diameter, 21/32" tall, 13/16" inner diameter.

• All models

PART #06-002P
$5.60 ea.

Gasket Strip, Taillight Body. Replaces original GM part #5948862. 23-3/4" developed length. 2 per car.

• All models except: convertible Biarritz Eldorado, Brougham Eldorado, & Special Sport Coupe

PART #06-004X
$37.40 / pair

Gasket, Taillight Lens. Die cut 1/8" sponge rubber, 3-5/16" diameter. Replaces original GM part #5948280.

• All models except: Eldorado Brougham, Eldorado Seville, & Eldorado Biarritz
• Note: Sixty Special will require 2 pairs

PART #06-010P
$20.25 / pair

Gasket, Taillight Lens. Replaces original GM part #5948189.

• Eldorado Seville [6237SDX] & Eldorado Biarritz [6267SX]
• Possible fit for Eldorado Brougham as well, but we have not confirmed this application.

PART #06-112P
$16.95 / pair

Grommet, Taillight Wiring through trunk inner panel. 1 pair per car. 1-11/16" Diameter. Replaces original GM part #1467232.

• All models

PART #06-003G
$12.00 / pair

Gasket, Parking & Signal Lamp Lens. Die cut from grey sponge rubber for a factory look and fit. Replaces original GM part # 5947907.

• All models without fog lamps

PART #06-117P
$15.00 / pair

Grommet, License Light Wire. Special design replaces original GM part #1461493.

• All models except commercial chassis

PART #06-028P
$1.90 ea.

Gasket, Interior Dome Lamp Lens. Die cut from black sponge rubber for a factory look and fit.

• All models except convertibles

PART #18-002P
$12.00 ea.

Mounting Pad Stock, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. 1/16" thick with special edge lip to hug bright work when clamped down. Shape outline to suit. Call for a free sample.

PART #06-013P
$5.50 / ft.

Pad, Antenna Mount. Molded replaces original GM part #1469781.

• All models with factory installed antenna

PART #06-032P
$14.70 ea.

Grommet, Windshield Wiper control cable or gas gauge wire through rear compartment pan. Replaces original GM part #4551272.

• All models

PART #03-001G
$1.30 ea.

Cover, Battery Clamp. Control unsightly sulphate build-up & help protect the nearby metal and finish. Available in black or red, sold separate.

PART #06-007X (black)
$8.00 ea.

PART #06-013X (red)
$8.00 ea.

Motor, Window Lift. Used for front or rear door window & rear quarter window. Factory rebuilt GM part# 5045639 & 5045640. ***Please note: motors are in stock, however this is an exchange item only - there will be a refundable core charge.***

• All models

PART #06-123X (driver side)
$74.50 ea.

PART #06-124X (passenger side)
$74.50 ea.

REFUNDABLE CORE CHARGE $25.00/motor

Rubber Spacers, Spark Plug Wires in organizer bracket. Two required per vehicle. Replaces original GM part #1458862.

• All models

PART #06-011X
$5.25 ea.

Grommet, Windshield Washer, Vacuum Lines, Antenna Lead, and others through firewall. Replaces original GM part #1456006.

• All models

PART #06-012G
$23.00 ea.

Grommet, Firewall Wiring Harness. 3-1/8" Wide by 2-1/16" tall, 5 holes. Replaces original GM part #1465162 for all models.

• All models

PART #06-015G
$21.10 ea.

Grommet, Speedometer Cable through firewall. 1-3/8" Diameter.

• All models

PART #06-018G
$20.40 ea.

Grommet, Parking Brake Cable through firewall.

• All models

PART #06-016G
$19.00 ea.

Grommet, Radiator Shroud. For headlight, turn signal, and horn wires.

• All models

PART #06-001G
$31.00 ea.

Pad, Parking Brake locking pedal. Fully molded slip on type replaces original GM part #1466241.

• All models

PART #08-004P
$9.20 ea.

Pad, Parking Brake release pedal. Fully molded slip on type replaces original GM part #1466654.

• All models

PART #08-005P
$4.10 ea.

Bushing, Propeller Shaft Retainer. Six pc. set. Replaces original GM part #1466147 & #1466149.

• All models

PART #09-002X
$44.40 / set

Rear Bumper to Body Filler. Die cut from high quality, original style black masticated rubber for a factory fit. Replaces original GM part #1465941. Click Here to see where this item goes.

• All models except: Eldorado Seville [6237SDX], Eldorado Biarritz [6267SX], & Commercial Chassis [8680S]

PART #01-111M
$34.00 each

Caps, Front Bumper Guard. Bumper "bullets." Replaces original GM part #1466583. Rubber with molded in plate and bolt.

• Eldorado Brougham only

PART #01-102X
$155.75 / pair

• All models except: Eldorado Brougham

PART #01-101X
$155.75 / pair

Radiator Seal Kit, 4 piece set, 2 per side. Die cut from high quality, original style black masticated rubber for a factory fit.

• All models except: Brougham

PART #02-101M
$36.00 / set

Fan Shroud Assembly Rubber, upper & lower. Assembly rubber fits between 2 upper, & 2 lower 180° bands.

• All models with factory AC

PART #02-109X
$19.50 / pair

***DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT***

A: Control Arm Shaft & Bushings, front upper, driver or passenger side, 2 kits required per car.

B: Control Arm (Rebound) Bumper, front upper, 2 required per car.

C: Ball Joint, front upper, driver or passenger side, 2 required per car.

D: Camber Eccentric - NOT AVAILABLE

E: Spring Insulator Cushion, front, mounts on coil top, 1 pair required per car.

***DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT***

F: Control Arm Bushings (Inner Assembly), front lower, driver or passenger side, 2 required per car.

G: Shock Bushing, front.

H: Lower Arm Bumper

I: Ball Joint, front lower, driver or passenger side, 2 required per car.

***DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT***

K: Stabilizer End Kit, 22 piece, 1 kit required per car.

L: Stabilizer/Sway Bar to Frame Bushing, 1 pair required per car.

***DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT***

M: Center Link

N: Outer Tie Rod End, passenger or driver side, 2 required per car.

O: Inner Tie Rod End - NOT AVAILABLE

P: Tie Rod Sleeve, passenger or driver side, 2 required per car.

***DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT***

Q: Spring Shackle Bushings, upper or lower, 12 required per car

R: Rubber Bumper, rear axle.

S: Rear Spring Insulator, upper or lower, 4 required per car

Dust Cover, Tie Rod Ends. Replaces original GM part #267026 and #505007.

• All models

PART #07-002X
$4.75 ea.

Seal, Lower Suspension Arm, Inner. Replaces original GM part #1464400. 4 required per car. 4 piece set.

• All models

PART #07-007X
$18.80 / kit

Seal, Upper A-arm, Inner. Replaces original GM part #1456574. 4 piece set.

• All models

PART #07-009X
$59.50 / kit

Grommet/Bushing. Flanged rubber grommet with metal sleeve bushing.

• All models, as required

PART #15-001G
$14.30 ea.

Bumper, Front Hood Adjuster. 7/8" dia. x 3/8" bumper on 1/4-20 stud. Replaces original GM part #'s 1469648 & 1462588.

• All models except Eldorado

PART #04-100B
$5.70 ea.

Bumper, Front Hood Adjuster. Replaces original GM part #1457511 & #1469581. 7/8" dia. bumper on 5/16"-18 threaded bolt. Four required per car.

• Eldorado only

PART #04-101B
$5.20 ea.

Bumper, Hood to Cowl, intermediate. Attaches to our hood to cowl weatherstrip. Replaces original GM part #1457244, 45, 46. Various heights: 0.28", 0.34", & 0.40".

• All models as required

PART #04-115B (0.28" tall)
$2.95 ea.

PART #04-116B (0.34" tall)
$2.95 ea.

PART #04-117B (0.40" tall)
$2.95 ea.

Bumper, Hood Side to Fender. Replaces original GM part #1456568. Four required per car.

• All models

PART #04-107B
$4.25 ea.

Bumper, Front Fender to Hood. 13/16" Diameter. Replaces original GM part #1471438. Six required per car.

• All models

PART #03-001B
$2.40 ea.

Bumpers, Hood. Four required per car, four per set.

• Most models as required including Eldorado Brougham
  

PART #04-121B
$27.00 / set

Seal, Hood to Fender. Exact profile rubber extrusion. Replaces original GM part #1468200. Two 16" strips.

• All models except Eldorado Brougham & Series 75

PART #04-102X
$56.10 / pair

Weatherstrip, Hood to Cowl. Extruded material cut 52" long. Replaces original GM part #4220564 & 4698277.

• All models except Eldorado Brougham

PART #04-103C
$40.00 ea.

Weatherstrip, Hood to Cowl. Correct cross section extrusion cut 44" long. Replaces original GM part #4689677.

• Eldorado Brougham only

PART #04-105C
$82.55 ea.

Weatherstrip, Hood to Fender, exact copy of original profile. Two strips, approximately 36" long each.

• Eldorado Brougham only

PART #04-103X
$128.50 / pair

Pad and Seal, Fender Skirt Edge. Exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two 5 ft. strips for 2 fender skirts.

• Most models including Eldorado Brougham

PART #14-003X
$45.00 / pair

Cover, Rocker Panel Inner Dust Shield. Replaces original GM part #4615576 perfectly. Fully molded with proper attaching teeth and flap. Found typically on two door cars, and serves as a cover for the drain in the fender in front of the rear tires. If you have a rectangular hole above a half moon hole about a foot in front of your rear tires facing towards the propeller shaft, this is the seal for those holes.

• All 2 door models

PART #03-005X
$11.00 / pair

Splash Apron Set. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arm, and inside inner fenders. Six piece kit, 3 per side. Staples are included.

• All models ex. Brougham

PART #03-101M
$44.99 / kit

Rear Wheelhouse Seals. Die cut from high quality, original style black masticated rubber for a factory fit. All mounting hardware holes are pre-cut.

• Known to fit 1958 Cadillac models, probably fits 1957 models also

PART #03-113M
$19.99 / pair

Rear Bumper to Body Filler. Die cut from high quality, original style black masticated rubber for a factory fit. Replaces original GM part #1465941. Click Here to see where this item goes.

• All models except: Eldorado Seville [6237SDX], Eldorado Biarritz [6267SX], & Commercial Chassis [8680S]

PART #01-111M
$25.00 each

Plug, Body Sheet Metal Holes. Used in various places (like trunks). 2 1/4" Diameter head, fits 1-1/2" diameter hole in body. Click here to see other size body plugs.

• All models as required

PART #20-019X
$3.25 ea.

Seal or Anti-Squeak, inner fender dust shield (splash shield), bulb type seal with stapling flange. Used many years, many applications. 12 ft. strip.

• All models

PART #03-002X
$36.00 / 12 feet

Seal, Rear Bumper to Body. Replaces original GM part #1460847. Includes two 30" strips of extrusion.

• Commercial Chassis only

PART #03-004X
$58.50 / pair

Filler and Cushion Strip, many applications. Top quality, two sizes available, sold by the foot.

PART #03-007X (1/16" thick x 1 3/8" wide)
$5.60 / ft.

PART #03-008X (5/32" thick x 1 3/8" wide)
$5.90 / ft.

Pad, Body Mounting. 2" square with 15/16" hole. Replaces original GM part #1447317.

• Convertibles only

PART #03-101H
$6.80 ea.

Pad, Body Mounting. Correct molded replacement for original GM part #1461768 & #1476996 with metal tube and washer core.

• All models except convertibles

PART #03-106H
$11.10 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 11/16" inside diameter, 9/16" thick. Replaces original GM part #1461987.

• All models except convertibles

PART #03-107H
$6.80 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 15/16" inside diameter, 9/16" thick. Replaces original GM part #1468935.

• All models

PART #03-108H
$6.80 ea.

Pad, Body Mounting to Chassis. Square type approximately 2-3/16" outside dimension, 3/4" inside diameter hole, 1/2" thick. Replaces original GM part #1461991.

• All models except convertibles

PART #03-109H
$6.80 ea.

Rear Quarter Window Leading Edge Seal. These weatherstrip's will have a metal core if required for proper operation.

Post Model Window Channel & Beltline Kit.

Includes: Two five foot sections of window run channel PART #10-013X, Four three foot sections of inner and outer beltline PART #10-049X, One pair of upper division channel seal PART #10-012X, & One pair lower division channel seals PART #10-016X.

Each kit provides enough for two doors (4 door post models order two kits.)

• All 2 & 4 door post models

PART #10-022X
$142.50 / set

Beltline "Window Fuzzies" or "Sweepers," Inner & Outer. Used on doors, rear quarters, inner & outer. Made with chrome bead, mohair faced, flexible, 7/16" wide X 15/64" thick. Trim length where necessary. Also available in 9/16" wide.

• Most models, as required - call for a free sample

PART #10-049X
$19.00 each (6' strip)

Window Run Channel, flexible snap-in, window glass run, front and rear doors. Flexible pile lining with rubber covering. 6 foot strip.

• Most closed models - compare original to sketch or call for a free sample

PART #10-017X
$38.60 / 6' strip

Window Run Channel, bright stainless beaded edge. Cloth covered, mohair lined, FLEXIBLE metal channel for sides and top of door windows. Perfect dimensions, 5/8" wide X 9/16" overall height, exact replacement. Sold in either 5' or 6' lengths.

• Most closed models - compare original to sketch or call for a free sample

PART #10-013X (5' strip)
$24.00 ea.

PART #10-014X (6' strip)
$26.00 ea.

Channel, Rigid Run, used on back side of division bar below beltline. Zinc plated steel with cloth insert - 1/2" deep x 1/2" wide x 15" long. ***This material is also available by the foot. Contact your RTRW salesperson for details.***

• Most models, as required - call for a free sample

PART #10-016X
$21.10 / pair (15" strips)

Channel, Door Window Lower Sash. Attaches to window lift assembly, and holds door glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required. Virtually all GM models. Sold in 4 ft. strips, usually sufficient for 2 windows. Formed steel channel only, not chromed. Ready for attaching to your old brackets. Use our sash channel fillers to set door glass into channel.

• All models, as required - call for a free sample

PART #10-045X
$23.20 ea.

Window Sash, Door & Vent. Replaces original GM part #4099013-4. Special type with wide weatherstrip edge to be trimmed at assembly, when necessary. Used on many models.

• Some models - call for a free sample

PART #10-015X
$5.70 / ft.

Filler Strip, Sash Channel, for all applications fitting glass to sash channel not requiring weather strip type of filler. Check your old filler strip to find thickness needed. Constructed of a rubber-like polymer designed for setting glass in a metal sash channel. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required - call for a free sample

PART #10-043X (1/32" thick)
$1.10 / ft.

PART #10-044X (1/16" thick)
$1.10 / ft.

Filler Strip, Sash Channel, for all applications fitting glass to sash channel not requiring weather strip type of filler. Check your old filler strip to find thickness needed. This is the highest quality linen back, rubber cork composition for a professional job on swing-out windshields, door vent windows and convertible side windows having metal frames, as well as many side or door windows on closed bodies. Please specify thickness required. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required - call for a free sample

PART #10-041X (1/32" thick)
$1.10 / ft.

PART #10-042X (1/16" thick)
$1.10 / ft.

Motor, Window Lift. Used for front or rear door window & rear quarter window. Factory rebuilt GM part# 5045639 & 5045640. ***Please note: motors are in stock, however this is an exchange item only - there will be a refundable core charge.***

• All models

PART #06-123X (driver side)
$74.50 ea.

PART #06-124X (passenger side)
$74.50 ea.

REFUNDABLE CORE CHARGE $25.00/motor

Cushion, Window Stop, lower (stem bumper). Replaces original GM part #4114117, #4665181, #4672308, #4814044. For front and rear door, rear side and quarter windows as req'd. 15/16" square, 1/2" thick.

• Most models, as required

PART #10-001B
$4.80 ea.

Cushion, Window Stop, lower (stem bumper). Replaces original GM part #4031052, for front and rear door, rear side and quarter windows as required. 7/8" Square x 5/16" thick.

• Most models, as required

PART #10-002B
$9.20 / pair

Pad, Vent Window Frame, self-retaining, 1/2" diameter X 5/32" high, for 3/16" hole.

• Eldorado Brougham

PART #10-011B
$1.30 ea.

Convertible Roof Rail Weatherstrip. The roof rail is the section typically over the side and rear quarter windows when the top is up. The roof rail kit contains 9 pieces, including the front bow seal. The hinge pillar section is the weatherstrip typically between the windshield post and the front door opposite the vent window. The hinge pillar kit contains 2 pieces, pair, L & R. Kits are sold separately.

Hardtop Roof Rail Seals. The roof rail seals seal the tops of the windows to the body. Made with molded ends to factory specifications for an exact fit.

Grommet, Folding Top Hydraulic Pump Mount. Special design to hold pump mounting bracket to floor pan. Replaces original GM part #3698109. Four (4) needed per car.

• All convertibles

PART #13-001G
$1.40 ea.

Spacer, Folding Top Power Cylinder Support. 4 used per car. Replaces original GM part #4149726.

• All convertibles

PART #13-009X
$2.90 ea.

Tape, Bow Drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 2-1/2" wide X 5 ft. roll.

PART #13-004X (black, 2.5" wide)
$8.25 / 5 ft. roll

PART #13-006X (tan, 2.5" wide)
$8.25 / 5 ft. roll

Tape, Bow Drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 5 " wide X 5 ft. roll.

PART #13-005X (black, 5 " wide)
$20.50 / 5 ft. roll

PART #13-007X (tan, 5 " wide)
$20.50 / 5 ft. roll

Door Weatherstrip Kits. High quality reproductions made with molded ends and clips as required. If you do not see your model listed in this section, please refer to our "Door Seals By the Foot" in the next section.

Weatherstrip, Door Edge. Use this seal if we do not have an exact match for your model in the "door weatherstrip kits" listed in the previous section. Great for ambulance, hearse, etc. For cement-on or nylon fastener applications. Available with or without molded in clips. Compare your original seal profile to the sketch. Sold by the foot.

PART #12-014X (without clips)
$3.50 / ft.

PART #12-015X (with clips)
$4.90 / ft.

Door Lock Pillar Seals. These weatherstrip's are normally used to seal the bottom edge of a quarter or rear side window on the lock pillar of the body. These fillers will have a metal core if required for proper operation.

Seal, Roof Rail, outer at 1/4 window. Replaces original GM part #4650269-70.

• All hardtop coupes

PART #12-034X
$17.90 / pair

Weatherstrip, Front Do