1960 Cadillac Factory Shop Manual on CD-ROM. Covers all models. Original manual scanned to digital format. Click Here for more info. Includes the following books:

1. 1959 Cadillac Factory Shop Manual
2. 1960 Cadillac Shop Manual Supplement
3. 1956 - 1965 Cadillac Parts Book

PART #SM-59CA
$47.99 ea.

Transmission Mount. Replaces original GM part #1440076, #1457558, #3630916, & #3631744. Re-vulcanization service only. Send in your core when ordering and allow 4 weeks.

• All models

Motor Mount. Replaces original GM part #1467058 & #1480098.

• All models

PART #05-001X
$45.00 / pair

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch.

• All models

PART #06-002P
$5.60 ea.

Grommet, Taillight Wiring through trunk inner panel. 1 pair per car. 1-11/16" Diameter. Replaces original GM part #1467232.

• All models

PART #06-003G
$12.00 / pair

Gasket, Taillight Lens - In Fin/Fender . Die cut from original style black sponge rubber for a factory look and fit. Replaces original GM part #5942106.

• All models

PART #06-119P
$12.00 / pair

Mounting Pad Stock, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. 1/16" thick with special edge lip to hug bright work when clamped down. Shape outline to suit.

PART #06-013P
$5.50 / ft.

Cover, Battery Clamp. Control unsightly sulphate build-up & help protect the nearby metal and finish. Available in black or red, sold separate.

PART #06-007X (black)
$8.00 ea.

PART #06-013X (red)
$8.00 ea.

Motor, Window Lift. Used for front or rear door window & rear quarter window. Factory rebuilt GM part# 5045639 & 5045640. ***Please note: motors are in stock, however this is an exchange item only - there will be a refundable core charge.***

• All models

PART #06-123X (driver side)
$74.50 ea.

PART #06-124X (passenger side)
$74.50 ea.

REFUNDABLE CORE CHARGE $25.00/motor

Rubber Spacers, Spark Plug Wires in organizer bracket. Replaces original GM part #1458862. Two required per car.

• All models

PART #06-011X
$5.25 ea.

Bearing Support Bracket Assembly, drive shaft center bearing. IN STOCK. Core required.

• All models

PART #09-001U
$105.60 ea.

Radiator to Support Seal, Upper. Die cut from high quality, original style black masticated rubber for a factory fit. Click here to see where this seal goes.

• All models w/ factory AC

PART #02-100M
$17.99 ea.

Gasket, Defroster Vent at base of windshield. One pair required per car. Replaces original GM part #4767681. Nice molded reproduction, 14-1/2" long.

• All models

PART #02-103P
$71.70 / pair

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

A: Control Arm Shaft & Bushings, front upper, driver or passenger side, 2 kits required per car.

B: Control Arm (Rebound) Bumper, front upper, 2 required per car.

C: Ball Joint, front upper, driver or passenger side, 2 required per car.

D: Camber Eccentric - NOT AVAILABLE

E: Spring Insulator Cushion, front, mounts on coil top, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

F: Control Arm Bushings (Inner Assembly), front lower, driver or passenger side, 2 required per car.

G: Shock Bushing, front.

H: Lower Arm Bumper

I: Ball Joint, front lower, driver or passenger side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

K: Stabilizer End Kit, 22 piece, 1 kit required per car.

L: Stabilizer/Sway Bar to Frame Bushing, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

M: Center Link

N: Outer Tie Rod End, passenger or driver side, 2 required per car.

O: Inner Tie Rod End - NOT AVAILABLE

P: Tie Rod Sleeve, passenger or driver side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

Q: Spring Shackle Bushings, upper or lower, 12 required per car

R: Rubber Bumper - NOT AVAILABLE

S: Rear Spring Insulator, upper or lower, 4 required per car

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

T: Rear Ball Joint

U: Control Yoke Bushing, manufactured as "1/2" bushings - 2 required per original bushing - 4 required total per car

V: Rear Spring Insulator

W: Rear Control Link Bushing (Front Side), 2 required per car

X: Rear Control Link Bushing (Rear Side), 2 required per car

Y: Bumper, Rear Cross Member or Frame

Dust Cover, Tie Rod Ends. Replaces original GM part #267026 and #505007.

• All models

PART #07-002X
$4.75 ea.

Seal, Lower Suspension Arm, Inner. Replaces original GM part #1464400. 4 required per car. 4 piece set.

• All models

PART #07-007X
$18.80 / kit

Seal, Upper A-arm, Inner. Replaces original GM part #1456574. 4 piece set.

• All models

PART #07-009X
$59.50 / kit

Bumper, Front Hood Adjuster. 2" Long with 7/8" diameter bumper. Replaces OEM #1457511 & #1469581. Two required per car.

• All models

PART #04-101B
$5.20 ea.

Bumper, Hood to Cowl, intermediate. Attaches to our hood to cowl weatherstrip. Replaces original GM part #1457244, 45, 46. Various heights: 0.34", & 0.41".

• All models as required

PART #04-118B (.34" tall)
$2.65 ea.

PART #04-119B (.41" tall)
$2.65 ea.

Bumper, Hood Side to Fender. Replaces original GM part #1456568. Four required per car.

• All models

PART #04-107B
$4.25 ea.

Bumpers, Hood. 4 per car, 4 included in kit. 9/16" Tall by 9/16" wide by 1-7/16" long.

• Most models as required
  

PART #04-121B
$27.00 / kit

Seal, Hood to Cowl weatherstrip. Correct cross section profile, 47 3/4" long. Replaces original GM part #1471998.

• All models

PART #04-106C
$42.30 ea.

Filler, Hood to Cowl Side Extension weatherstrip. Fully molded from soft rubber with all original details. Replaces original GM part #4761418.

• All models

PART #04-114C
$47.50 / pair

Pad and Seal, Fender Skirt Edge. Exact copy, trim notch for skirt lock at installation. 1/2" Thick x 7/16" tall. Two 5' strips, enough for 2 fender skirts.

• Most models

PART #14-003X
$47.70 / pair

Cover, Rocker Panel Inner Dust Shield. Replaces original GM part #4615576 perfectly. Fully molded with proper attaching teeth and flap. Found typically on two door cars, and serves as a cover for the drain in the fender in front of the rear tires. If you have a rectangular hole above a half moon hole about a foot in front of your rear tires facing towards the propeller shaft, this is the seal for those holes.

• All 2 door models

PART #03-005X
$11.00 / pair

Radiator Support / Inner Fender Filler Kit. Die cut from original style masticated rubber for a factory fit. Four piece kit. Click here to see where these seals go.

• All models

PART #01-106M
$25.99 / kit

Splash Apron Set. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arm, and inside inner fenders. Click here to see where these seals go.

• All models

PART #03-102M
$49.99 / kit

Body to Fender Seals, pair right and left. Die cut from original style masticated rubber for an original fit. All fastener holes pre-cut and ready for install.

• Known to fit all 1959 models except Brougham - probably fits all 1960 models except Brougham as well

PART #03-142M
$9.75 / pair

Plug, Floor Pan, rear compartment and body. 1 1/16" Diameter head, fits 3/4" diameter sheet metal hole. Replaces original GM part #4805844. Up to 12 per car, as required. Click here to see other size body plugs.

• All models

PART #03-006X
$1.90 ea.

Seal or Anti-Squeak, inner fender dust shield (splash shield), bulb type seal with stapling flange. Used many years, many applications. 1-1/4" wide with 1/4" bulb. Sold in 12' strips.

PART #03-002X
$36.00 / 12 feet

Pad, Body Mounting. Correct molded replacement for original GM part #1461768 & #1476996 with metal tube and washer core.

• All models except convertibles

PART #03-106H
$11.10 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 11/16" inside diameter, 9/16" thick. Replaces original GM part #1461987.

• All models except convertibles

PART #03-107H
$6.80 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 15/16" inside diameter, 9/16" thick. Replaces original GM part #1468935.

• All models

PART #03-108H
$6.80 ea.

Pad, Body Mounting to Chassis. Square type approximately 2-3/16" outside dimension, 3/4" inside diameter hole, 1/2" thick. Replaces original GM part #1461991.

• All models except convertibles

PART #03-109H
$6.80 ea.

Rear Quarter Window Leading Edge Seal. These weatherstrip's will have a metal core if required for proper operation.

Weatherstrip, Fixed Quarter Window. Fully molded replacement for original GM part #4758723-4.

• All 6 window sedans

PART #10-010X
$131.20 / pair

Channel, Rigid Run, lower side window below beltline, zinc plated steel with cloth lining, 1/2" deep X 1/2" wide, 15" long, 2 strips.

• Many models, as required

PART #10-016X
$21.10 / pair

Window Run Channel, stainless beaded edge. Cloth covered, mohair lined, FLEXIBLE metal channel for sides and top of door windows. Perfect dimensions, 5/8" wide X 9/16" overall height, exact replacement. Sold in either 5' or 6' lengths.

PART #10-013X (5' strip)
$24.00 ea.

PART #10-014X (6' strip)
$26.00 ea.

Click to ENLARGE

Channel, Door Window Lower Sash. Attaches to window lift assembly, and holds door glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required. Virtually all GM models. Sold in 4 ft. strips, usually sufficient for 2 windows. Formed steel channel only, not chromed. Ready for attaching to your old brackets. Use our sash channel fillers to set door glass into channel.

• All models

PART #10-045X
$23.20 ea.

Filler Strip, Sash Channel, for all applications fitting glass to sash channel not requiring weatherlip type of filler. Check your old filler strip to find thickness needed. This is the highest quality linen back, rubber cork composition for a professional job on swing-out windshields, door vent windows and convertible side windows having metal frames, as well as many side or door windows on closed bodies. Please specify thickness required. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required

PART #10-041X (1/32" thick)
$1.10 / ft.

PART #10-042X (1/16" thick)
$1.10 / ft.

Filler Strip, Sash Channel. Constructed of a rubber-like polymer designed for setting glass in a metal sash channel. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required

PART #10-043X (1/32" thick)
$1.10 / ft.

PART #10-044X (1/16" thick)
$1.10 / ft.

Motor, Window Lift. Used for front or rear door window & rear quarter window. Factory rebuilt GM part# 5045639 & 5045640. ***Please note: motors are in stock, however this is an exchange item only - there will be a refundable core charge.***

• All models

PART #06-123X (driver side)
$74.50 ea.

PART #06-124X (passenger side)
$74.50 ea.

REFUNDABLE CORE CHARGE $25.00/motor

Cushion, Window Stop, lower (stem bumper). Replaces original GM part #4114117, #4665181, #4672308, & #4814044. For front and rear door, rear side and quarter windows as required. 15/16" Square x 1/2" thick with "carrot" type retainer.

• Most models, as required

PART #10-001B
$4.80 ea.

Convertible Roof Rail Weatherstrip. The roof rail is the section typically over the side and rear quarter windows when the top is up. The roof rail kit contains 7 pieces, including the front bow seal. The hinge pillar section is the weatherstrip typically between the windshield post and the front door opposite the vent window. The hinge pillar kit contains 2 pieces, pair, L & R. Kits are sold separately.

Hardtop Roof Rail Seals. The roof rail seals seal the tops of the windows to the body. Made with molded ends to factory specifications for an exact fit.

Grommet, Folding Top Hydraulic Pump Mount. Special design to hold pump mounting bracket to floor pan. Replaces original GM part #3698109. Four (4) needed per car.

• All convertibles

PART #13-001G
$1.40 ea.

Spacer, Folding Top Power Cylinder Support. 4 used per car. Replaces original GM part #4149726.

• All convertibles

PART #13-009X
$2.90 ea.

Tape, Bow Drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 2-1/2" wide X 5 ft. roll.

PART #13-004X (black, 2.5" wide)
$8.25 / 5 ft. roll

PART #13-006X (tan, 2.5" wide)
$8.25 / 5 ft. roll

Tape, Bow Drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 5 " wide X 5 ft. roll.

PART #13-005X (black, 5 " wide)
$20.50 / 5 ft. roll

PART #13-007X (tan, 5 " wide)
$20.50 / 5 ft. roll

Door Weatherstrip Kits, pair left and right. High quality reproductions made with molded ends and clips as required. If you do not see your model listed in this section, please refer to our "Door Seals By the Foot" in the next section.

Weatherstrip, Door Edge. Use this seal if we do not have an exact match for your model in the "door weatherstrip kits" listed in the previous section. Great for ambulance, hearse, etc. For cement-on or nylon fastener applications. Available with or without molded in clips. Compare your original seal profile to the sketch. Sold by the foot.

PART #12-016X (without clips)
$3.90 / ft.

PART #12-017X (with clips)
$4.80 / ft.

Weatherstrip, Door Edge. Use this seal if we do not have an exact match for your model in the "door weatherstrip kits" listed in the previous section. Great for ambulance, hearse, etc. For cement-on or nylon fastener applications. Available with or without molded in clips. Compare your original seal profile to the sketch. Sold by the foot.

PART #12-014X (without clips)
$3.50 / ft.

PART #12-015X (with clips)
$4.90 / ft.

Door Lock Pillar Seals. These weatherstrip's are normally used to seal the bottom edge of a quarter or rear side window on the lock pillar of the body. These fillers will have a metal core if required for proper operation.

Weatherstrip, Front Door Opening "J" Seals. Auxiliary seal on door hinge pillar at beltline, right and left. 4 fasteners included. Replaces original GM part #4758392-3.

• All models

PART #12-036X
$23.00 / pair

Weatherstrip, Door Bottom drain hole. Replaces original GM part #4779422.

• All Models except 2 dr HT's with screwed on door panels

PART #12-003X
$2.75 / pair

Weatherstrip, Upper Vertical on Rear Body Lock Pillar. 11" long steel core, cloth facing. Replaces original GM part #4777977-8. Pair, right and Left.

• All 6 window sedans

PART #12-035X
$76.00 / pair

Gutter, Cowl Side Drain, left & right. Replaces original GM part #4782251-2. Rubber with metal core as original.

• Fleetwood 75 [6723] & Fleetwood Limo [6733] only

PART #12-037X
$107.70 / pair

Bumper, Door Edge. Replaces original GM part #4431695. Typically 2 per door. 3/4" Tall x 1 1/16" long x 9/16 thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models

PART #12-015B
$1.25 ea.

Bumper, Door Edge, twin retainer style. 13/16" long x 1/2 " tall x 3/8 " thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some sedan models

PART #12-006B
$2.25 ea.

Bumper, Rear Door, twin retainer style. 15/16" long x 3/8" tall x 1/2" thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some sedan models

PART #12-005B
$2.25 ea.

Bumper, Rear Door. Replaces original GM part #4762475. Compare to original, use as required. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some models

PART #12-014B
$1.25 ea.

Bumper, Front Door above the upper hinge on the upper radius of the door. Stiff backed, retained by screw. 13/16" Diameter.

• All closed models

PART #12-001B
$3.15 ea.

Bumper, Rear Door. Plug style used on many models.

• Many models, compare with your original

PART #12-018B
$3.50 ea.

Gasket Set, Outside Door Handle. Die cut rubber construction. Replaces original GM part #4777800 & 804, and #3764622. Six piece set for 2 handles.

• All models

PART #12-004P
$10.50 / kit

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

• All models

PART #12-009P
$1.10 ea

Mounting Pad / Gasket, Rear View Mirror to Door. Exact reproduction of original GM part.

• All models

PART #12-013P
$6.00 ea

Seal, Rear Door At Rear Of Window. 1-3/4" x 7/8".

• All 4 door hardtp models

PART #12-007X
$12.50 ea.

Weatherstrip, Deck Lid/Trunk. Cut to length, excellent quality rubber sponge more durable than original.

• All models

PART #16-003T
$19.00 ea.

Bumper, Deck Lid, cap type for adjustable screw, 15/16" O.D., 7/16" thick.

• Some models, as required

PART #17-001B
$1.45 ea.

Bumper, Deck Lid, self-retaining. 7/8" O.D., 5/16" thick, fits 1/4" hole. Replaces original GM part #4721222.

• All models

PART #17-005B
$1.15 ea.

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

• All models