1962 Cadillac Factory Shop Manual on CD-ROM. Covers all models. Original manual scanned to digital format. Click Here for more info. Includes the following books:

1. 1962 Cadillac Factory Shop Manual
2. 1956 - 1965 Cadillac Parts Book

PART #SM-62CA
$47.99 ea.

Bumper, Engine Yaw Control. Re-vulcanization service only. Send in old core and allow 4 weeks for service. Replaces original GM part #1478691, 2 per car on 2nd cross member.

• All models except: Fleetwood 6 window sedan [6723], Fleetwood 6 window limo [6733], & Commercial Chassis [6890]

Transmission Mount. Re-vulcanization service only. Send in old 2 piece metal core, and allow 4 weeks for service. Replaces original GM part #3632330.

• All models except: Fleetwood 6 window sedan [6723], Fleetwood 6 window limo [6733], & Commercial Chassis [6890]

PART #05-016X
$89.20 ea.

Motor Mount. Replaces original GM part #1467058 & #1480098.

• All models

PART #05-001X
$45.00 / pair

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch.

• All models

PART #06-002P
$5.60 ea.

Gasket, Parking & Fog Light Lens. Die cut from original style grey sponge rubber for a factory look and fit. Replaces original GM part #5953202

• All models

PART #06-116P
$15.00 / pair

Gasket, Taillight Lens - In Fin/Fender . Die cut from original style black sponge rubber for a factory look and fit. Replaces original GM part #5942106.

• All models

PART #06-119P
$12.00 / pair

Mounting Pad Stock, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. 1/16" thick with special edge lip to hug bright work when clamped down. Shape outline to suit.

PART #06-013P
$5.50 / ft.

Seal, Wiper Motor Crank. For two speed wiper motors only. Replaces original GM part #4906021.

• Fleetwood 75 Sedan [6723]
• Fleetwood Limo [6733]
• Commercial Chassis [6890]

PART #06-012X
$19.50 ea.

Cover, Battery Clamp. Control unsightly sulphate build-up & help protect the nearby metal and finish. Available in black or red, sold separate.

PART #06-007X (black)
$8.00 ea.

PART #06-013X (red)
$8.00 ea.

Motor, Window Lift. Used for front or rear door window & rear quarter window. Factory rebuilt GM part# 5045639 & 5045640. ***Please note: motors are in stock, however this is an exchange item only - there will be a refundable core charge.***

• All models

PART #06-123X (driver side)
$74.50 ea.

PART #06-124X (passenger side)
$74.50 ea.

REFUNDABLE CORE CHARGE $25.00/motor

Rubber Spacers, Spark Plug Wires in organizer bracket. Replaces original GM part #1458862. Two required per car.

• All models

PART #06-011X
$5.25 ea.

Bearing Support Bracket Assembly, drive shaft center bearing. IN STOCK. Core required.

• All models

PART #09-001U
$105.60 ea.

Insulator, Radiator Mounting Cushion. Molded with proper retainers. Replaces original GM part #578372. Up to 4 used per car.

• All models

PART #02-107X
$14.80 ea.

Gasket, Defroster Vent at base of windshield. One pair required per car. Replaces original GM part #4767681.

• Fleetwood 6 window sedan [6723]
• Fleetwood 6 window limo [6733]

PART #02-103P
$71.70 / pair

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

A: Control Arm Shaft & Bushings, front upper, driver or passenger side, 2 kits required per car. Available with or without shaft.

B: Control Arm (Rebound) Bumper - NOT AVAILABLE

C: Ball Joint, front upper.

D: Camber Eccentric, passenger or driver side, 2 required per car.

E: Spring Insulator Cushion, front, mounts on coil top, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

F: Control Arm Bushings, front lower, driver or passenger side, 2 required per car.

G: Shock Bushing, front.

H: Lower Arm Bumper - NOT AVAILABLE

I: Ball Joint, front lower, driver or passenger side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

K: Stabilizer End Kit, 22 piece, 1 kit required per car.

L: Stabilizer/Sway Bar to Frame Bushing, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

J: Strut Rod Bushing Kit, 1 kit required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

M: Center Link

N: Outer Tie Rod End, passenger or driver side, 2 required per car.

O: Inner Tie Rod End, passenger or driver side, 2 required per car.

P: Tie Rod Sleeve, passenger or driver side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

Q: Spring Shackle Bushings, upper or lower, 12 required per car

R: Rubber Bumper - NOT AVAILABLE

S: Rear Spring Insulator, upper or lower, 4 required per car

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

T: Rear Ball Joint.

U: Control Yoke Bushing, 2 required per car.

V: Rear Spring Insulator

W: Rear Control Link Bushing (Front Side), 2 required per car

X: Rear Control Link Bushing (Rear Side), 2 required per car

Y: Bumper, Rear Cross Member or Frame

Bumper, Front Hood Adjuster. Replaces original GM part #1480643. Correct design with proper screw thread.

• All models

PART #04-102B
$5.50 ea.

Bumper, Hood to Cowl, intermediate. Attaches to our hood to cowl weatherstrip. Replaces original GM part #1457244, 45, 46. Various heights: 0.34", & 0.41".

• All models as required

PART #04-118B (.34" tall)
$2.65 ea.

PART #04-119B (.41" tall)
$2.65 ea.

Bumper, Hood Side to Fender. Mounts to fender. Correct detail with ridges as original. Four required per car. Replaces original GM part #1476114.

• All models

PART #04-108B
$3.95 ea.

Seal, Hood to Cowl Weatherstrip. Correct cross section profile. Replaces original GM part # 1476093.

• All models except: Fleetwood 6 window sedan [6723] & Fleetwood 6 window limo [6733]

PART #04-107C
$40.00 ea.

Seal, Hood to Cowl Weatherstrip. Correct cross section profile. Replaces original GM part #1471998.

• Fleetwood 6 window sedan [6723]
• Fleetwood 6 window limo [6733]

PART #04-106C
$42.30 ea.

Pad and Seal, Fender Skirt Edge. Exact copy, trim notch for skirt lock at installation. 1/2" Thick x 7/16" tall. Two 5' strips, enough for 2 fender skirts.

• Most models

PART #14-003X
$45.00 / pair

Cover, Rocker Panel Inner Dust Shield. Replaces original GM part #4615576 perfectly. Fully molded with proper attaching teeth and flap. Found typically on two door cars, and serves as a cover for the drain in the fender in front of the rear tires. If you have a rectangular hole above a half moon hole about a foot in front of your rear tires facing towards the propeller shaft, this is the seal for those holes.

• All 2 door models

PART #03-005X
$11.00 / pair

Splash Apron Set. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arm, and inside inner fenders. 14 piece kit. Staples are included. Click here to see where these seals go.

• All models

PART #03-104M
$49.99 / kit

Plug, Floor Pan, rear compartment and body. 1 1/16" Diameter head, fits 3/4" diameter sheet metal hole. Replaces original GM part #4805844. Up to 12 per car, as required. Click here to see other size body plugs.

• All models

PART #03-006X
$1.90 ea.

Body/Cowl to Fender Seal Kit. Die cut from original style masticated rubber for an original fit. All fastener holes pre-cut and ready for install. Click here to see where these seals go.

• All models

PART #03-114M
$29.99 / pair

Filler and Cushion Strip, many applications. Top quality, two sizes available, sold by the foot.

PART #03-007X (1/16" thick x 1 3/8" wide)
$5.60 / ft.

PART #03-008X (5/32" thick x 1 3/8" wide)
$5.90 / ft.

Pad, Body Mounting. Correct molded replacement for original GM part #1461768 & #1476996 with metal tube and washer core.

• All models

PART #03-106H
$11.10 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 11/16" inside diameter, 9/16" thick. Replaces original GM part #1461987.

• All models except convertibles

PART #03-107H
$6.80 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 15/16" inside diameter, 9/16" thick. Replaces original GM part #1468935.

• All models

PART #03-108H
$6.80 ea.

Pad, Body Mounting to Chassis. Square type approximately 2-3/16" outside dimension, 3/4" inside diameter hole, 1/2" thick. Replaces original GM part #1461991.

• All models

PART #03-109H
$6.80 ea.

Windshield Gasket, Front. These channels are of the highest quality, authenticity, and are made in the U.S.A.

Windshield Gasket, Rear. These channels are of the highest quality, authenticity, and are made in the U.S.A.

Rear Quarter Window Leading Edge Seal. These weatherstrip's will have a metal core if required for proper operation.

Weatherstrip, Fixed Quarter Window. Fully molded replacement for original GM part #4813454-5.

• All 6 window sedans

PART #10-011X
$119.20 / pair

Weatherstrip, Outer Beltline "Scraper Seal." Sold in two 38" pieces, require that you cut to fit. This is the material used on doors and rear quarters. Designed to be stapled or rivited to door trim as original. Two pair is sufficient material for all models.

• All models

PART #10-048X
$24.15 / pair

Channel, Door Window Lower Sash. Attaches to window lift assembly, and holds door glass. Replaces original GM part #4437507-8. Formed steel channel only, not chromed. Ready for attaching to your old brackets. 32-3/8" long. Use our sash channel fillers to set door glass into channel.

• All Coupes

PART #10-018X
$69.30 / pair

Filler Strip, Sash Channel, for all applications fitting glass to sash channel not requiring weatherlip type of filler. Check your old filler strip to find thickness needed. This is the highest quality linen back, rubber cork composition for a professional job on swing-out windshields, door vent windows and convertible side windows having metal frames, as well as many side or door windows on closed bodies. Please specify thickness required. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required

PART #10-041X (1/32" thick)
$1.10 / ft.

PART #10-042X (1/16" thick)
$1.10 / ft.

Filler Strip, Sash Channel. Constructed of a rubber-like polymer designed for setting glass in a metal sash channel. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required

PART #10-043X (1/32" thick)
$1.10 / ft.

PART #10-044X (1/16" thick)
$1.10 / ft.

Motor, Window Lift. Used for front or rear door window & rear quarter window. Factory rebuilt GM part# 5045639 & 5045640. ***Please note: motors are in stock, however this is an exchange item only - there will be a refundable core charge.***

• All models

PART #06-123X (driver side)
$74.50 ea.

PART #06-124X (passenger side)
$74.50 ea.

REFUNDABLE CORE CHARGE $25.00/motor

Bumper, Quarter Window Stop on sash channel. 13/16" Tall x 3/4" long x 1/2" wide. Replaces original GM part #5716994.

• All Convertibles

PART #10-012B
$2.90 ea.

Cushion, Window Stop, lower (stem bumper). Replaces original GM part #4114117, #4665181, #4672308, & #4814044. For front and rear door, rear side and quarter windows as required. 15/16" Square x 1/2" thick with "carrot" type retainer..

• Most models, as required

PART #10-001B
$4.80 ea.

Convertible Roof Rail Weatherstrip. The roof rail is the section typically over the side and rear quarter windows when the top is up. The roof rail kit contains 7 pieces, including the front bow seal. The hinge pillar section is the weatherstrip typically between the windshield post and the front door opposite the vent window. The hinge pillar kit contains 2 pieces, pair, L & R. Kits are sold separately.

Hardtop Roof Rail Seals. The roof rail seals seal the tops of the windows to the body. Made with molded ends to factory specifications for an exact fit.

Grommet, Folding Top Hydraulic Pump Mount. Special design to hold pump mounting bracket to floor pan. Replaces original GM part #3698109. Four (4) needed per car.

• All convertibles

PART #13-001G
$1.40 ea.

Tape, Bow Drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 2-1/2" wide X 5 ft. roll.

PART #13-004X (black, 2.5" wide)
$8.25 / 5 ft. roll

PART #13-006X (tan, 2.5" wide)
$8.25 / 5 ft. roll

Tape, Bow Drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 5 " wide X 5 ft. roll.

PART #13-005X (black, 5 " wide)
$20.50 / 5 ft. roll

PART #13-007X (tan, 5 " wide)
$20.50 / 5 ft. roll

Door Weatherstrip Kits, pair left and right. High quality reproductions made with molded ends and clips as required. If you do not see your model listed in this section, please refer to our "Door Seals By the Foot" in the next section.

Weatherstrip, Door Edge. Use this seal if we do not have an exact match for your model in the "door weatherstrip kits" listed in the previous section. Great for ambulance, hearse, etc. For cement-on or nylon fastener applications. Available with or without molded in clips. Compare your original seal profile to the sketch. Sold by the foot.

PART #12-016X (without clips)
$3.90 / ft.

PART #12-017X (with clips)
$4.80 / ft.

Weatherstrip, Door Edge. Use this seal if we do not have an exact match for your model in the "door weatherstrip kits" listed in the previous section. Great for ambulance, hearse, etc. For cement-on or nylon fastener applications. Available with or without molded in clips. Compare your original seal profile to the sketch. Sold by the foot.

PART #12-014X (without clips)
$3.50 / ft.

PART #12-015X (with clips)
$4.90 / ft.

Door Lock Pillar Seals. These weatherstrip's are normally used to seal the bottom edge of a quarter or rear side window on the lock pillar of the body. These fillers will have a metal core if required for proper operation.

Weatherstrip, Vertical on Lock Pillar. Replaces original GM part #4810364-5.

• All 6 window sedans & Fleetwood Sixty Special Sedan

PART #12-039X
$33.40 / pair

Seal, Front Door Hinge Pillar at beltline. Top quality molded rubber. Replaces original GM part #4816190-1.

• All models except: Fleetwood 75 Sedan [6723] & Fleetwood 75 Limo [6733]

PART #12-008X
$28.00 / pair

Weatherstrip, Door Bottom drain hole. 2 15/16" long. Replaces original GM part # 4853425 .

• All Models

PART #12-004X
$3.00 ea.

Gutter, Windshield Lower Corner, left and right. Rubber with metal core as original. Replaces original GM part #4817250.

• All models except: Fleetwood 75 Sedan [6723] & Fleetwood 75 Limo [6733]

PART #12-038X
$102.00 / pair

Gutter, Cowl Side Drain, left & right. Replaces original GM part #4782251-2. Rubber with metal core as original.

• Fleetwood 75 [6723] & Fleetwood Limo [6733] only

PART #12-037X
$107.70 / pair

Bumper, Door Edge. Replaces original GM part #4431695. Typically 2 per door. 3/4" Tall x 1 1/16" long x 9/16 thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models

PART #12-015B
$1.25 ea.

Bumper, Door Edge, twin retainer style. 13/16" long x 1/2 " tall x 3/8 " thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Sedan DeVille Rear Door Upper - Probably other models as well

PART #12-006B
$2.25 ea.

Bumper, Rear Door, twin retainer style. 15/16" long x 3/8" tall x 1/2" thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some sedan models, on rear door

PART #12-005B
$2.25 ea.

Bumper, Rear Door. Replaces original GM part #4762475. Compare to original, use as required. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some models

PART #12-014B
$1.25 ea.

Gasket Set, Outside Door Handle. Die cut rubber construction. Replaces original GM part #4813565-66. Six piece set for 2 handles. Includes rubber washers for handle button.

• All models except: Fleetwood 75 Sedan [6723] & Fleetwood 75 Limo [6733]

PART #12-005P
$10.50 / kit

Gasket Set, Outside Door Handle. Die cut rubber construction. Replaces original GM part #4777800 & 804, and #3764622. Six piece set for 2 handles.

• Fleetwood 75 Sedan [6723]
• Fleetwood 75 Limo [6733]

PART #12-004P
$10.50 / kit

Rear View Mirror Mounting Pad. Die cut from dense neoprene rubber.

• All models

PART #12-015P
$6.00 ea.

Pressure Ring (washer) for interior door handle and window regulator escutcheon. Die cut from sponge rubber for a factory look and fit.

• All models

PART #12-016P
$3.50 / pair

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

• All models

PART #12-009P
$1.10 ea