1965 Buick Factory Shop Manual on CD-ROM. Original manual scanned to digital format. Click Here for more info. Covers 1965 Buick Riviera & Special models.

PART #SM-65BU
$47.99 ea.

Motor Mount, front right & left. Replaces original GM part # 1196936, 1237584, & 1376874.

PART #05-023X
$30.00 / pair

Transmission Mount. Replaces original GM part #1359965, 1376875, & 1382063-4. For Riveria models with Super Tubine 400 transmission.
**This is a core exchange only, so be sure to send in old metal core when ordering. Allow 4 weeks for service.**

PART #05-026X
$77.85 ea.

Click to ENLARGE

Insulator, Radiator Mounting Cushion. Molded with proper retainers, 6" long x 7/32" thick. Replaces original GM part #578372. Up to 4 used per car.

PART #02-107X
$14.80 ea.

Grommet, Antenna Lead through Sheet Metal. 1-9/16" overall diameter. Replaces original GM part #1189054.

PART #06-025G
$7.55 ea.

Pad, Antenna Mount. Replaces original GM part #579526. Used on models with manual antennas only, 1-3/8" outer diameter, 11/16" inner diameter.

PART #06-034P
$4.50 ea.

Seal, Tail Lamp Housing to Rear Quarter Panel. Proper extrusion cross section like original. Two strips 24" long.

PART #06-015X
$19.25 / pair

Click to ENLARGE

Cover, Battery Clamp. Control unsightly sulphate build-up & help protect the nearby metal and finish. Available in black or red, sold separate.

PART #06-007X (black)
$8.00 ea.

PART #06-013X (red)
$8.00 ea.

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch.

PART #06-002P
$5.60 ea.

Splash Apron Set WITH CLIPS. Die cut from original style black masticated rubber for a factory fit. Pieces fit over a-arm, inside inner fenders. Three piece kit. Click here to see where these go. 21 OEM clips included.

PART #03-121MC
$49.00 / kit

Splash Apron Set WITHOUT CLIPS. Die cut from original style black masticated rubber for a factory fit. Pieces fit over a-arm, inside inner fenders. Three piece kit. Click here to see where these go.

PART #03-121M
$29.00 / kit

Clips, Splash Apron. Multi-purpose clips used for many applications. Identical to original GM clips.

PART #19-013F
$1.25 ea.

Clips, Splash Apron, Body to Fender Seals. Multi-purpose clips used for many applications. Identical to original GM clips.

PART #19-003F
$0.85 ea.

Click to ENLARGE

Bumper, Inner Fender to Splash Pan. Replaces original GM part #1361972. This bumper will only be seen when inner fender is removed. 2 used per car.

PART #03-002B
$1.35 ea.

Bumper, License Plate. Replaces original GM part #1341091

PART #01-101B
$3.40 ea.

Click to ENLARGE

Cover, Rocker Panel Inner Dust Shield. Replaces original GM part #4615576 perfectly. Fully molded with proper attaching teeth and flap. Found typically on two door cars, and serves as a cover for the drain in the fender in front of the rear tires.

PART #03-005X
$11.00 / pair

Mount, Body. Made with metal core /collar. Listed for full size models. Compare to original. Click on image to enlarge and view dimensioning. Replaces original GM part #1195719.

PART #03-112H
$8.75 ea.

Mount, Body. Made with metal core /collar. Listed for full size models. Compare to original. Click on image to enlarge and view dimensioning. Replaces original GM part #1357341.

PART #03-113H
$8.20 ea.

Pad, Body Mount, Lower Bolt Retaining. Replaces original GM part #1377367. Used on the bottom of most mounting locations (acts as washer for head of body mounting bolt and to assist with negative compression forces at mount location). Up to 12 used per vehicle on bodies with typical frame on body construction. Compare to original. Click on image to enlarge and view dimensioning.

PART #03-114H
$8.75 ea.

Click to ENLARGE

Insulator, Body Hold Down Bolt. Replaces original GM part #1190478. Compare to original. Click on image to enlarge and view dimensioning.

PART #03-115H
$6.50 ea.

Bumper, Hood Adjuster. Replaces original GM part #1239472 & #1347890. Cadmium plated bolt 5/16-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.

PART #04-124B
$4.40 ea.

Bumper, Hood to Fender Ledge. Mounts on fender ledge. Replaces original GM part #1353922.

PART #04-123B
$3.00 ea.

Seal, Hood to Cowl. Correct profile for an exact fit.

PART #04-115C
$21.85 ea.

A: Rubber Vent Window Seals, pair left & right. High quality exact molded replacements.

PART #10-061V
$111.25 / pair

B: Sash Channel Filler - used to fit vent glass to metal sash channel. Made from black rubber polymer, 1/32" thick, sold by the foot.

PART #10-043X
$1.10 / ft.

C: Rubber Division Seal, pair left & right. Seals rear side of vent glass to division channel.

PART #10-062V
$28.00 / pair

D: Flocked Channel Seal - INCLUDES molded upper bumpers like original. Pair, left & right.

PART #10-047X
$36.65 / kit

Rear Quarter Window Lead Edge Seals. Correct profile for an exact fit. Pair, right & left.

PART #10-063V
$17.85 / pair

Door Lock Pillar Seals. These weatherstrip's are normally used to seal the bottom edge of a quarter or rear side window on the lock pillar of the body. These fillers will have a metal core if required for proper operation.

PART #10-122L
$33.25 / pair

Filler Strip, Sash Channel. Constructed of a rubber-like polymer designed for setting glass in a metal sash channel. This item is not returnable except for quality assurance issues. Order by the foot.

PART #10-043X (1/32" thick)
$1.10 / ft.

PART #10-044X (1/16" thick)
$1.10 / ft.

Weatherstrip, Beltline, Inner. Rigid, rubber covered weatherstrip with flock lining and 1/4" chrome edge. Used on front door, rear door and rear quarter window. 6 ft. strip.

PART #10-035X
$23.20 ea.

Hardtop Roof Rail Seals. Correct profile with molded ends, pair L & R.

PART #11-148R
$85.00 / pair

Door Weatherstrip, pair L & R. High quality exact replacements. Made with molded ends as original.

PART #12-166D
$63.50 / pair

Click to ENLARGE

Bumper, Door Side. Replaces original GM part #4878385.

PART #12-019B
$3.60 ea.

Click to ENLARGE

Seal, Door Bottom drain hole. 2 15/16" long. Replaces original GM part # 4853425 .

PART #12-004X
$3.00 ea.

Conduit for Power Window Wiring from front door to body through hinge pillar. Set includes three grommets placed around a 17" length of our extruded rubber tubing. Replaces original GM part #4479837 for both front doors.

PART #12-009X
$91.00 / pair

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

PART #12-009P
$1.10 ea.

Click to ENLARGE

Weatherstrip, Deck Lid/Trunk. Cut to length, excellent quality rubber sponge more durable than original.

PART #16-003T
$19.00 ea.

Click to ENLARGE

Bumper, Deck Lid, self-retaining, 7/8" O.D., 5/16" thick, fits 1/4" hole. Replaces original GM part #4721222.

PART #17-005B
$1.15 ea.

Click to ENLARGE

Gasket, Buick Crest / Trunk Lock Cover. Die cut to original specifications.

PART #17-007P
$6.75 ea.

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

PART #12-009P
$1.10 ea.

Trunk Liner, loose weave. Black with scattered white threads, 50" wide. Sold by the foot.

PART #17-001X
$9.75 / ft.

Click to ENLARGE

Grommet, Dimmer Switch for carpet application, 2-3/4" O.D., wide flange for stitching, 1" hole for dimmer switch.

PART #18-001G
$7.30 ea.

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch.

PART #06-002P
$5.60 ea.

Bumper, Ash Tray Glove or Box Door. For 1/8" to 5/32" hole, 5/32" thick pad, 5/16" diameter.

PART #18-001B
$0.80 ea.

Bumper, Ash Tray or Glove Box Door. For 1/8" to 5/32" hole, 1/4" thick pad, 5/16" diameter.

PART #18-002B
$0.80 ea.

Grommet, Sun Visor Rod. Made of gray rubber, 3/4" long.

• All models

PART #18-006X
$1.75 ea.

Trip Meter Reset Knob . UNIVERSAL TYPE made of black rubber. 1/8" I.D., 7/16" O.D. X 1/2" tall.

• Some models

PART #18-007X
$5.00 ea.

3M™ Adhesive Remover. Quickly removes wax, grease, oil and adhesive residue. It will not harm most cured automotive paints and is also suitable for vinyl and glass surfaces. 8 oz. can.

PART #23-002X
$13.00 / 8 oz. can

3M™ Super Weatherstrip Adhesive is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, vinyl headliners, and side panels in place. 5 oz. tube.

PART #23-001X
$9.00 / 5 oz. tube