1965 Cadillac Factory Shop Manual on CD-ROM. Covers all models. Original manual scanned to digital format. Click Here for more info. Includes the following books:

1. 1965 Cadillac Factory Shop Manual
2. 1965 Body Service Manual
3. 1956 - 1974 Cadillac Parts Book

PART #SM-65CA
$47.99 ea.

Bumper, Engine Yaw Control. Re-vulcanization service for original GM part # 1481982 . Send in old core from both sides and allow 4 weeks for service.

• Fleetwood 75 Sedan [69723]
• Fleetwood 75 Limo [69733]

Motor Mount, front engine support. Replaces original GM part #1467058 & #1480098.

• Fleetwood 75 Sedan [69723]
• Fleetwood 75 Limo [69733]

PART #05-001X
$45.00 / pair

Motor Mount, front engine support. Replaces original GM part #1484315.

• All models except series 75

PART #05-002X
$60.00 / pair

Transmission Mount. Replaces original GM part #3632473. This is a core exchange only, so be sure to send in old metal core when ordering. Allow 4 weeks for service.

• Fleetwood 75 Sedan [69723]
• Fleetwood 75 Limo [69733]

PART #05-014X
$89.20 ea.

Transmission Mount. Replaces original GM part #3633035 . This is a core exchange only, so be sure to send in old metal core when ordering. Allow 4 weeks for service.

• All models except series 75

PART #05-012X
$89.20 ea.

Plug, Brake Adjustment Hole. Replaces original GM part #5467299. Fits 5/16" X 1" slot.

• Most models

PART #08-001X
$1.40 ea.

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch.

• All models

PART #06-002P
$5.60 ea.

Gasket, Parking & Directional Lamp Lens. Die cut from high quality grey sponge rubber to original specifications for a factory fit. Replaces original GM part #5955086.

• Series 75

PART #06-102P
$10.00 / pair

Gasket, Cornering Lamp Lens. Die cut from high quality grey sponge rubber to original specifications for a factory fit. Replaces original GM part #5955081.

• Series 75

PART #06-103P
$10.00 / pair

Gasket, Tail Lamp Lens - IN FIN. Die cut from high quality black sponge rubber to original specifications for a factory fit. Replaces original GM part #5954866.

• Series 75

PART #06-104P
$10.00 / pair

Gasket, Tail Lamp Lens - IN BUMPER. Die cut from high quality grey sponge rubber to original specifications for a factory fit. Replaces original GM part #5954880.

• Series 75

PART #06-105P
$12.00 / pair

Gasket, Tail Rear License Plate Light Lens. Die cut from high quality grey sponge rubber to original specifications for a factory fit. Replaces original GM part #5955300.

• Series 75 & Commercial Chassis

PART #06-106P
$8.50 / pair

Gasket, Directional Signal Indicator Lens. Die cut from high quality black sponge rubber to original specifications for a factory fit. Replaces original GM part #5955266. Click Here to see where this part goes.

• Series 75 & Commercial Chassis

PART #06-108P
$6.50 / pair

Gasket, Tail Light Inner Lens. Die cut from high quality black sponge rubber to original specifications for a factory fit. Four piece kit. Replaces original GM part #5955593. Click Here to see where this part goes.

• Series 75 & Commercial Chassis

PART #06-109P
$5.00 / kit

Mounting Pad Stock, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. 1/16" thick with special edge lip to hug bright work when clamped down. Shape outline to suit.

PART #06-013P
$5.50 / ft.

Cover, Battery Clamp. Control unsightly sulphate build-up & help protect the nearby metal and finish. Available in black or red, sold separate.

PART #06-007X (black)
$8.00 ea.

PART #06-013X (red)
$8.00 ea.

Bearing Support Bracket Assembly, drive shaft center bearing. IN STOCK. Core required.

• Series 75

PART #09-001U
$105.60 ea.

Mount, A/C Condenser. 4 used per car. Replaces original GM part #1480250.

• All models with A/C

PART #02-108X
$8.20 ea.

Gasket, Defroster Vent at base of windshield. One pair required per car. Replaces original GM part #4767681.

• Fleetwood 75 Sedan [6723] & Fleetwood Limo [6733] ONLY

PART #02-103P
$71.70 / pair

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

A: Control Arm Shaft & Bushings, front upper, driver or passenger side, 2 kits required per car. Available with or without shaft.

B: Control Arm (Rebound) Bumper - NOT AVAILABLE

C: Ball Joint, front upper.

D: Camber Eccentric, passenger or driver side, 2 required per car.

E: Spring Insulator Cushion, front, mounts on coil top, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

F: Control Arm Bushings, front lower, driver or passenger side, 2 required per car.

G: Shock Bushing, front.

H: Lower Arm Bumper - NOT AVAILABLE

I: Ball Joint, front lower, driver or passenger side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

K: Stabilizer End Kit, 22 piece, 1 kit required per car.

L: Stabilizer/Sway Bar to Frame Bushing, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

J: Strut Rod Bushing Kit, 1 kit required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

M: Center Link

N: Outer Tie Rod End, passenger or driver side, 2 required per car.

O: Inner Tie Rod End, passenger or driver side, 2 required per car.

P: Tie Rod Sleeve, passenger or driver side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

Q: Spring Shackle Bushings, upper or lower, 12 required per car

R: Rubber Bumper

S: Rear Spring Insulator, upper or lower, 4 required per car

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

T: Rear Ball Joint - NOT AVAILABLE

U: Control Yoke Bushing - NOT AVAILABLE

V: Rear Spring Insulator

W-X: Rear Control Link Bushing

Y: Bumper

Bumper, Front Hood Adjuster. Replaces original GM part # 1480643. Correct design with proper screw thread.

• Series 75

PART #04-102B
$5.50 ea.

Bumper, Hood to Cowl, intermediate. Attaches to our hood to cowl weatherstrip. Replaces original GM part #1457244, 45, 46. Various heights: 0.34", & 0.41".

• Series 75

PART #04-118B (.34" tall)
$2.65 ea.

PART #04-119B (.41" tall)
$2.65 ea.

Bumper, Hood Side to Fender. Mounts to fender. Correct detail with ridges as original. Four required per car. Replaces original GM part #1476114.

• Series 75

PART #04-108B
$3.95 ea.

Bumper, Hood Side to Fender. Mounts to fender. Four required per car. Replaces original GM part # 1490003 .

• ALL models except: series 75

PART #04-110B
$3.50 ea.

Bumper, Hood to Cowl Vent, Grill Frame. Replaces original GM part #1482384. Top dimension 1/2 x 5/8", 1/8" thick.

• All models except: Eldorado

PART #04-122B
$1.20 ea.

Hood to Cowl weatherstrip. Correct cross section profile. Replaces original GM part #1471998.

• Series 75

PART #04-106C
$42.30 ea.

Weatherstrip, Hood to Cowl Side Seals. Fully molded, left and right. Replaces original GM part #1483358-9.

• All models except: Series 75

PART #04-111C
$49.00 ea.

Cover, Rocker Panel Inner Dust Shield. Replaces original GM part #4615576 perfectly. Fully molded with proper attaching teeth and flap. Found typically on two door cars, and serves as a cover for the drain in the fender in front of the rear tires. If you have a rectangular hole above a half moon hole about a foot in front of your rear tires facing towards the propeller shaft, this is the seal for those holes.

• All 2 door models

PART #03-005X
$11.00 / pair

Splash Apron Set. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arm, and inside front inner fenders. 8 piece kit. Click here to see where these seals go.

• All models

PART #03-106M
$49.99 / kit

Plug, Floor Pan, rear compartment and body. 1 1/16" Diameter head, fits 3/4" diameter sheet metal hole. Replaces original GM part #4805844. Up to 12 per car, as required. Click here to see other size body plugs.

• All models

PART #03-006X
$1.90 ea.

Filler and Cushion Strip, many applications. Top quality, two sizes available, sold by the foot.

PART #03-007X (1/16" thick x 1 3/8" wide)
$5.60 / ft.

PART #03-008X (5/32" thick x 1 3/8" wide)
$5.90 / ft.

Pad, Body Mounting. Correct molded replacement for original GM part #1461768 & #1476996 with metal tube and washer core.

• Series 75

PART #03-106H
$11.10 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 11/16" inside diameter, 9/16" thick. Replaces original GM part #1461987.

• Series 75

PART #03-107H
$6.80 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 15/16" inside diameter, 9/16" thick. Replaces original GM part #1468935.

• Series 75

PART #03-108H
$6.80 ea.

Pad, Body Mounting to Chassis. Square type approximately 2-3/16" outside dimension, 3/4" inside diameter hole, 1/2" thick. Replaces original GM part #1461991.

• Series 75

PART #03-109H
$6.80 ea.

Windshield Gasket, Front. These channels are of the highest quality, authenticity, and are made in the U.S.A.

Rear Quarter Window Leading Edge Seal. These weatherstrip's will have a metal core if required for proper operation.

Weatherstrip, Outer Beltline "Scraper Seal." Sold in two 38" pieces, require that you cut to fit. Identical to original material. This is the material used on doors (front or rear) and rear quarters. Designed to be attached to the trim at the door top using the fold over tabs as original. Two pair is typically sufficient material for all models.

• All models

PART #10-048X
$24.15 / pair

Filler Strip, Sash Channel, for all applications fitting glass to sash channel not requiring weatherlip type of filler. Check your old filler strip to find thickness needed. This is the highest quality linen back, rubber cork composition for a professional job on swing-out windshields, door vent windows and convertible side windows having metal frames, as well as many side or door windows on closed bodies. Please specify thickness required. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required

PART #10-041X (1/32" thick)
$1.10 / ft.

PART #10-042X (1/16" thick)
$1.10 / ft.

Filler Strip, Sash Channel. Constructed of a rubber-like polymer designed for setting glass in a metal sash channel. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required

PART #10-043X (1/32" thick)
$1.10 / ft.

PART #10-044X (1/16" thick)
$1.10 / ft.

Convertible Roof Rail Weatherstrip. The roof rail is the section typically over the side and rear quarter windows when the top is up. The roof rail kit contains 7 pieces, including the front bow seal. The hinge pillar section is the weatherstrip typically between the windshield post and the front door opposite the vent window. The hinge pillar kit contains 2 pieces, pair, L & R. Roof rail & hinge pillar its are sold separately.

Hardtop Roof Rail Seals. The roof rail seals seal the tops of the windows to the body. Made with molded ends to factory specifications for an exact fit.

Grommet, Folding Top Hydraulic Pump Mount. Special design to hold pump mounting bracket to floor pan. Replaces original GM part #3698109. Four (4) needed per car.

• All convertibles

PART #13-001G
$1.40 ea.

Tape, Bowdrill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 2-1/2" wide X 5 ft. roll.

PART #13-004X (black, 2.5" wide)
$8.25 / 5 ft. roll

PART #13-006X (tan, 2.5" wide)
$8.25 / 5 ft. roll

Tape, Bowdrill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 5 " wide X 5 ft. roll.

PART #13-005X (black, 5 " wide)
$20.50 / 5 ft. roll

PART #13-007X (tan, 5 " wide)
$20.50 / 5 ft. roll

Door Weatherstrip Kit, pair left and right. High quality reproductions made with molded ends and clips as required. If you do not see your model listed in this section, please refer to our "Door Seals By the Foot" in the next section.

Weatherstrip, Door Edge. Use this seal if we do not have an exact match for your model in the "door weatherstrip kits" listed in the previous section. Great for ambulance, hearse, etc. For cement-on or nylon fastener applications. Available with or without molded in clips. Compare your original seal profile to the sketch. Sold by the foot.

PART #12-016X (without clips)
$3.90 / ft.

PART #12-017X (with clips)
$4.80 / ft.

Weatherstrip, Door Edge. Use this seal if we do not have an exact match for your model in the "door weatherstrip kits" listed in the previous section. Great for ambulance, hearse, etc. For cement-on or nylon fastener applications. Available with or without molded in clips. Compare your original seal profile to the sketch. Sold by the foot.

PART #12-014X (without clips)
$3.50 / ft.

PART #12-015X (with clips)
$4.90 / ft.

Door Lock Pillar Seals. These weatherstrip's are normally used to seal the bottom edge of a quarter or rear side window on the lock pillar of the body. These fillers will have a metal core if required for proper operation.

Weatherstrip, Center Post. Left & right, front & rear door on body. Replaces original GM part #4537016, 17, 18, & 19. Used on 4 dr post sedan.

• Sedan DeVille [68369]
• Calais Sedan [68269]
• Fleetwood 60 Special [68069]

PART #12-040X
$43.90 / kit

Weatherstrip, Door Bottom drain hole. 2 15/16" long. Replaces original GM part # 4853425 .

• Series 75

PART #12-004X
$3.00 ea.

Gutter, Cowl Side Drain, left & right. Replaces original GM part #4782251-2. Rubber with metal core as original.

• Series 75

PART #12-037X
$107.70 / pair

Bumper, Door Edge, twin retainer style. 15/16" long x 3/8" tall x 1/2" thick. Typically 2 per door, used on both front and rear doors. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models

PART #12-005B
$2.25 ea.

Bumper, Door Edge, twin retainer style. 13/16" long x 1/2 " tall x 3/8 " thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Possible replacement - compare original

PART #12-006B
$2.25 ea.

Conduit for Power Window Wiring from front door to body through hinge pillar. Set includes three grommets placed around a 17" length of our extruded rubber tubing. Replaces original GM part #4479837 for both front doors.

• All models

PART #12-009X
$91.00 / pair

Seal, Door Bottom Drain Hole. Held in place by two "carrot" type retainers. Replaces original GM part #4489247.

• All models

PART #12-005X
$3.00 ea.

Rear View Mirror Mounting Pad. Die cut from dense neoprene rubber.

• All models except series 75

PART #12-011P
$6.50 ea.

Gasket Set, Outside Door Handle. Six (6) piece set for 2 handles. Includes rubber washers for handle button. Replaces original GM part #4882414-5.

• All models except Series 75

PART #12-006P
$10.50 / kit

Gasket Set, Outside Door Handle. Die cut rubber construction. Replaces original GM part #4777800 & 804, and #3764622. Six piece set for 2 handles.

• Series 75

PART #12-004P
$10.50 / kit

Pressure Ring (washer) for interior door handle and window regulator escutcheon. Die cut from sponge rubber for a factory look and fit.

• All models

PART #12-017P
$3.50 / pair

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

• All models

PART #12-009P
$1.10 ea.

Weatherstrip, Deck Lid/Trunk. Cut to length, excellent quality rubber sponge more durable than original.

• All models

PART #16-003T
$19.00 ea.

Gasket, Trunk Lock Emblem Escutcheon. Steel rule die cut rubber of exact profile. Replaces original GM part #4420084.

• All models

PART #17-004P
$4.50 ea.

Trunk Liner, loose weave. Black with scattered white threads. 54" wide. Sold by the foot

• All models

PART #17-001X
$9.75 / ft.

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

• All models

PART #12-009P
$1.10 ea.

Bumper, Glove Box Door. For 1/8" to 5/32" hole, 5/32" thick pad, 5/16" diameter.

• Many models, as required

PART #18-001B
$0.80 ea.

Bumper, Glove Box Door. For 1/8" to 5/32" hole, 1/4" thick pad, 5/16" diameter.

• Many models, as required

PART #18-002B
$0.80 ea.

Bumper, Bench Seat. Made with steel core like original. 1-1/2" long, 7/16" thick. 2-4 Required per vehicle. These bumpers can be seen when you push the front seat forward to access the rear seat.

• All 2 door models w/ bench seat

PART #18-006B
$5.00 ea.

Grommet, Sun Visor Rod. Made of gray rubber, 3/4" long.

• All models

PART #18-006X
$1.75 ea.

Trip Meter Reset Knob . UNIVERSAL TYPE m ade of black rubber. 1/8" I.D., 7/16" O.D. X 1/2" tall.

• All models

PART #18-007X
$5.00 ea.

Grommet, Dimmer Switch for carpet application, 2-3/4" O.D., wide flange for stitching, 1" hole for dimmer switch.

• Closed bodies, many models

PART #18-001G
$7.30 ea.

Grommet, Instrument Panel to Windshield Frame. 2-6 required. Replaces original GM part #4614412.

• All Fleetwood Models.

PART #18-005G
$5.90 ea.

1/4-20 U-Nut. Used on most models for many applications.

• All models

PART #19-012F
$0.65 ea.

3M™ Adhesive Remover. Quickly removes wax, grease, oil and adhesive residue. It will not harm most cured automotive paints and is also suitable for vinyl and glass surfaces. 8 oz. can.

PART #23-002X
$13.00 / 8 oz. can

3M™ Super Weatherstrip Adhesive (BLACK) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, headliners, and side panels in place. 5 oz. tube.

PART #23-003X
$11.00 / 5 oz. tube

3M™ Super Weatherstrip Adhesive (YELLOW) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, vinyl headliners, and side panels in place. 5 oz. tube.

PART #23-001X
$11.00 / 5 oz. tube