1970 Buick Factory Shop Manual on CD-ROM. Original manual scanned to digital format. Click Here for more info. Covers 1970 Buick Riviera & Special models.

PART #SM-70BU
$47.99 ea.

Click to ENLARGE

Cover, Battery Clamp. Control unsightly sulphate build-up & help protect the nearby metal and finish. Available in black or red, sold separate.

PART #06-007X (black)
$8.00 ea.

PART #06-013X (red)
$8.00 ea.

Click to ENLARGE

Grommet, Dimmer Switch for carpet application, 2-3/4" O.D., wide flange for stitching, 1" hole for dimmer switch.

PART #18-001G
$7.30 ea.

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch.

PART #06-002P
$5.60 ea.

Splash Apron / A Arm Dust Shields. Die cut from original style black masticated rubber, 2 piece kit.

PART #03-146M
$15.00 / kit

Clips, Splash Apron, Body to Fender Seals. Multi-purpose clips used for many applications. Identical to original GM clips.

PART #19-003F
$0.85 ea.

Click to ENLARGE

Cover, Rocker Panel Inner Dust Shield. Replaces original GM part #4615576 perfectly. Fully molded with proper attaching teeth and flap. Found typically on two door cars, and serves as a cover for the drain in the fender in front of the rear tires.

PART #03-005Xm
$11.00 / pair

Pad, Body Mount, Lower Bolt Retaining. Replaces original GM part #1377367. Used on the bottom of most mounting locations (acts as washer for head of body mounting bolt and to assist with negative compression forces at mount location). Up to 12 used per vehicle on bodies with typical frame on body construction. Compare to original. Click on image to enlarge and view dimensioning.

PART #03-114H
$8.75 ea.

Click to ENLARGE

Bumper, Hood Adjuster. Replaces original GM part #1239472 & #1347890. Cadmium plated bolt 5/16-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.

PART #04-124B
$4.40 ea.

Seal, Hood to Cowl. Correct profile for an exact fit.

PART #04-116C
$35.55 ea.

Rear Quarter Window Lead Edge Seals. Correct profile for an exact fit. Pair, right & left.

PART #10-054V
$36.00 / pair

Door Lock Pillar Seals. These weatherstrip's are normally used to seal the bottom edge of a quarter or rear side window on the lock pillar of the body. These fillers will have a metal core if required for proper operation.

PART #10-123L
$24.00 / pair

Filler Strip, Sash Channel. Constructed of a rubber-like polymer designed for setting glass in a metal sash channel. This item is not returnable except for quality assurance issues. Order by the foot.

PART #10-043X (1/32" thick)
$1.10 / ft.

PART #10-044X (1/16" thick)
$1.10 / ft.

Click to ENLARGE

Weatherstrip, Beltline, Inner. Rigid, rubber covered weatherstrip with flock lining and 1/4" chrome edge. Used on front door, rear door and rear quarter window. 6 ft. strip.

PART #10-035X
$23.20 ea.

Clip, Quarter Window Reveal Molding. Made of steel, 1-3/8" x 11/16". Use as required.

PART #19-004F
$1.75 ea.

Click to ENLARGE

Clip, Rear Reveal Molding. Made of steel, 15/16" x 1". Use as required.

PART #19-005F
$1.75 ea.

Click to ENLARGE

Clip, Rear Windshield Reveal Molding. Made of steel, 15/16" x 3/4 ". Use as required.

PART #19-006F
$1.75 ea.

Clip, Windshield Reveal Molding. Made of steel, 1-1/4" x 3/4". Use as required.

PART #19-008F
$1.75 ea.

Hardtop Roof Rail Seals. Correct profile with molded ends, pair L & R. **These pieces stop at the rear quarter window as original**

PART #11-149R
$85.00 / pair

Door Weatherstrip, pair L & R. High quality exact replacements. Made with molded ends as original.

PART #12-136D
$75.00 / pair

Click to ENLARGE

Bumper, Door Side. 1" Long x 3/4" tall x 7/16" thick. Four used per car. Replaces original GM part #7639207.

PART #12-016B
$4.00 ea.

Click to ENLARGE

Seal, Door Bottom Drain Hole. Replaces original GM part #4489247.

PART #12-005X
$3.00 ea.

Conduit for Power Window Wiring from front door to body through hinge pillar. Set includes three grommets placed around a 17" length of our extruded rubber tubing. Replaces original GM part #4479837 for both front doors.

PART #12-009X
$91.00 / pair

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

PART #12-009P
$1.10 ea.

Click to ENLARGE

Weatherstrip, Deck Lid/Trunk. Cut to length, excellent quality rubber sponge more durable than original.

PART #16-003T
$19.00 ea.

Click to ENLARGE

Bumper, Deck Lid, self-retaining, 7/8" O.D., 5/16" thick, fits 1/4" hole. Replaces original GM part #4721222.

PART #17-005B
$1.15 ea.

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

PART #12-009P
$1.10 ea.

Trunk Liner, loose weave. Black with scattered white threads, 50" wide. Sold by the foot.

PART #17-001X
$9.75 / ft.

Click to ENLARGE

Grommet, Dimmer Switch for carpet application, 2-3/4" O.D., wide flange for stitching, 1" hole for dimmer switch.

PART #18-001G
$7.30 ea.

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch.

PART #06-002P
$5.60 ea.

Ferrule, Door Lock Rod. Stainless steel with felt insert, 1" outer diameter fits 5/8" hole.

PART #18-008X
$3.15 ea.

Bumper, Ash Tray Glove or Box Door. For 1/8" to 5/32" hole, 5/32" thick pad, 5/16" diameter.

PART #18-001B
$0.80 ea.

Bumper, Ash Tray or Glove Box Door. For 1/8" to 5/32" hole, 1/4" thick pad, 5/16" diameter.

PART #18-002B
$0.80 ea.

Sleeve, Sun Visor Support.

• All models

PART #18-005X
$3.00 ea.

Grommet, Sun Visor Rod. Made of gray rubber, 3/4" long.

• All models

PART #18-006X
$1.75 ea.

Trip Meter Reset Knob . Made of black rubber. 1/8" I.D., 7/16" O.D. X 1/2" tall.

• Some models

PART #18-007X
$5.00 ea.

3M™ Adhesive Remover. Quickly removes wax, grease, oil and adhesive residue. It will not harm most cured automotive paints and is also suitable for vinyl and glass surfaces. 8 oz. can.

PART #23-002X
$13.00 / 8 oz. can

3M™ Super Weatherstrip Adhesive is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, vinyl headliners, and side panels in place. 5 oz. tube.

PART #23-001X
$9.00 / 5 oz. tube