1971 Cadillac Factory Shop Manual on CD-ROM. Covers all models. Original manual scanned to digital format. Click Here for more info. Includes the following books:

1. 1971 Cadillac Factory Shop Manual
2. 1971 Body Service Manual
3. 1964 - 1974 Cadillac Parts Book

PART #SM-71CA
$47.99 ea.

Motor Mount, Rear Support. Replaces original GM part #1498469. Re-vulcanization service only. Send in your old cores and allow 4 weeks for service. Two (2) mounts required per car.

• Eldorado only

PART #05-009X
$84.00 ea.

Motor Mount, Front. Re-vulcanization service only. Replaces original GM part #3633370. Send in complete old core and allow 4 weeks for service.

• Eldorado only

PART #05-010X
$89.20 ea.

Motor Mount, front right & left.

• All models except : Eldorado

PART #05-007X
$60.00 pair

Transmission Mount. Replaces original GM part # 3633087 .

• All models except : Eldorado

PART #05-005X
$29.00 ea.

Click to ENLARGE

Decal, Air Cleaner, "Keep Your GM All GM." Replaces original GM part #6485887.

• All models

PART #DA0115
$5.25 ea.

Click to ENLARGE

Decal, Air Cleaner Snorkle.

• All models

PART #DA0051
$7.95 ea.

Plug, Brake Adjustment Hole. Replaces original GM part #5467299. 1-1/4 Overall length X 7/8" tall, fits 5/16" X 1" slot.

• Models w/ drum brakes

PART #08-001X
$1.40 ea.

Key Blank, W/ Cadillac Logo, Glove box, Door, & Trunk. Original GM part #7027283. This is a GM original part - New Old Stock (NOS) - limited supply. Used for trunk, door, and Glove box. Keyway "B."

• All models

PART #06-012Y
$12.75

Key Blank, W/ Cadillac Logo, Ignition. Original GM part #77027277. This is a GM original part - New Old Stock (NOS) - limited supply. Used for ignition. Keyway "A."

• All models

PART #06-011Y
$12.75 each - COMMING SOON

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch.

• All models

PART #06-002P
$5.60 ea.

Gasket, Cornering Lamp Lens. Die cut from high quality grey sponge rubber to original specifications for a factory fit. Replaces original GM part #5960172.

• Eldorado only

PART #06-115P
$14.00 / pair

Motor, Window Lift. Used for front or rear door window & rear quarter window. Factory rebuilt GM part# 5045639 & 5045640. ***Please note: motors are in stock, however this is an exchange item only - there will be a refundable core charge.***

• All models

PART #06-123X (driver side)
$74.50 ea.

PART #06-124X (passenger side)
$74.50 ea.

REFUNDABLE CORE CHARGE $25.00/motor

Cover, Battery Clamp. Control unsightly sulphate build-up & help protect the nearby metal and finish. Available in black or red, sold separate.

PART #06-007X (black)
$8.00 ea.

PART #06-013X (red)
$8.00 ea.

Propeller Shaft Bearing Retainer. Replaces original GM part #7802241. Fits Series 75 and Commercial Chassis (Hearse. Ambulance, etc.) Re-vulcanization service only. Send in your old re-buildable retainer. Please allow 4 weeks for service.

• Series 75 & Commercial Chassis

PART #09-003U
$180.10 ea.

Mount, A/C Condenser. 1-7/8" Overall length with 1" diameter X 3/4" long rubber spacer. Four used per car. Replaces original GM part #1480250.

• All models with A/C

PART #02-108X
$8.20 ea.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

A: Control Arm Shaft & Bushings, front upper, driver or passenger side, 2 kits required per car. Available with or without shaft.

B: Control Arm (Rebound) Bumper - NOT AVAILABLE

C: Ball Joint, front upper.

D: Camber Eccentric, passenger or driver side, 2 required per car.

E: Spring Insulator Cushion - NOT AVAILABLE

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

F: Control Arm Bushings, front lower, driver or passenger side, 2 required per car.

G: Shock Bushing - NOT AVAILABLE

H: Lower Arm Bumper - NOT AVAILABLE

I: Ball Joint, front lower, driver or passenger side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

K: Stabilizer End Kit, 22 piece, 1 kit required per car.

L: Stabilizer/Sway Bar to Frame Bushing, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

J: Strut Rod Bushing Kit, 1 kit required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

M: Center Link

N: Outer Tie Rod End, passenger or driver side, 2 required per car.

O: Inner Tie Rod End, passenger or driver side, 2 required per car.

P: Tie Rod Sleeve, passenger or driver side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

Q: Spring Shackle Bushings, upper or lower, 12 required per car

R: Rubber Bumper - NOT AVAILABLE

S: Rear Spring Insulator, upper or lower, 4 required per car

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

T: Rear Ball Joint - NOT AVAILABLE

U: Control Yoke Bushing - NOT AVAILABLE

V: Rear Spring Insulator - NOT AVAILABLE

W-X: Rear Control Link Bushing (Front or Rear Side)

Y: Bumper - NOT AVAILABLE

Bumper, Front Hood Adjuster, 2 3/8" tall with 1 1/8" diameter head. Replaces original GM part # 400765.

• Some models as required

PART #04-104B
$5.40 ea.

Bumper, Hood Side to Fender. Mounts to fender. Four required per car. Replaces original GM part #1498726

• All models

PART #04-142B
$3.15 ea.

Bumper Cap, Front Hood Adjuster. Slips over the adjustable bolt for the hood.  Nice reproductions.  Caps are approx. 1-1/16" diameter, 11/16" tall.  Will slip over 1/2" to 7/8" head.

• All models

PART #04-140B
$3.40 ea.

Hood to Cowl Seal. Correct rubber extrusion replacement for original GM part #9886375, #9873794, or #1498724.

• All models

PART #04-113C
$24.80 ea.

Splash Apron Set. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arms, and inside inner fenders. 6 piece kit. Installation clips included.

• Eldorado only

PART #03-110M
$49.99 / kit

Splash Apron Set. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arms, and inside inner fenders. 4 piece kit. Installation clips included.

• All models except Eldorado

PART #03-119M
$65.00 / kit

Filler and Cushion Strip, many applications. Top quality, two sizes available, sold by the foot.

PART #03-007X (1/16" thick x 1 3/8" wide)
$5.60 / ft.

PART #03-008X (5/32" thick x 1 3/8" wide)
$5.90 / ft.

Rear Quarter Window Leading Edge Seal. These weatherstrip's will have a metal core if required for proper operation.

Sometimes called “window fuzzies” or “sweepers,” the beltline weatherstrip runs horizontally along the tops of the doors and rear quarter areas. The inner beltline typically attach to the top of the door panels. The outer beltline typically attach to the top of the door behind the trim.

The following kits are pre-cut and pre-formed to the size & contour of your vehicle. All fastener holes or attaching tabs are in place and any necessary fasteners will be included. No modifications are necessary.

If your models is not listed in the table below, please see the next group of parts.

The following parts are the correct original GM material, but will require you to cut to fit yourself. Some modifiactions will be necessary.

Filler Strip, Sash Channel, for all applications fitting glass to sash channel not requiring weatherlip type of filler. Check your old filler strip to find thickness needed. This is the highest quality linen back, rubber cork composition for a professional job on swing out windshields, door vent windows and convertible side windows having metal frames, as well as many side or door windows on closed bodies. Please specify thickness required. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required

PART #10-041X (1/32" thick)
$1.10 / ft.

PART #10-042X (1/16" thick)
$1.10 / ft.

Filler Strip, Sash Channel. Constructed of a rubber-like polymer designed for setting glass in a metal sash channel. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required

PART #10-043X (1/32" thick)
$1.10 / ft.

PART #10-044X (1/16" thick)
$1.10 / ft.

Motor, Window Lift. Used for front or rear door window & rear quarter window. Factory rebuilt GM part# 5045639 & 5045640. ***Please note: motors are in stock, however this is an exchange item only - there will be a refundable core charge.***

• All models

PART #06-123X (driver side)
$74.50 ea.

PART #06-124X (passenger side)
$74.50 ea.

REFUNDABLE CORE CHARGE $25.00/motor

Convertible Roof Rail Weatherstrip. The roof rail is the section typically over the side and rear quarter windows when the top is up. The roof rail kit contains 5 pieces, including the front bow seal. The hinge pillar section is the weatherstrip typically between the windshield post and the front door opposite the vent window. The hinge pillar kit contains 2 pieces, pair, L & R. Roof rail & hinge pillar its are sold separately.

Hardtop Roof Rail Seals. The roof rail seals seal the tops of the windows to the body. Made with molded ends to factory specifications for an exact fit.

Weatherstrip, Front Bow to Windshield. Included in convertible roof rail kit #11-146R listed above. Replaces original GM part # 9833656 .

• Eldorado convertible

PART #13-003X
$49.00 ea.

Grommet, Folding Top Hydraulic Pump Mount. Special design to hold pump mounting bracket to floor pan. Replaces original GM part #3698109. Four required per vehicle.

• All convertibles

PART #13-001G
$1.40 ea.

Tape, Bowdrill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 2-1/2" wide X 5 ft. roll.

PART #13-004X (black, 2.5" wide)
$8.25 / 5 ft. roll

PART #13-006X (tan, 2.5" wide)
$8.25 / 5 ft. roll

Tape, Bowdrill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 5 " wide X 5 ft. roll.

PART #13-005X (black, 5 " wide)
$20.50 / 5 ft. roll

PART #13-007X (tan, 5 " wide)
$20.50 / 5 ft. roll

Door Weatherstrip, pair left and right. High quality reproductions made with molded ends and clips as required. If you do not see your model listed in this section, please refer to our "Door Seals By the Foot" in the next section.

Weatherstrip, Door Edge. Use this seal if we do not have an exact match for your model in the "door weatherstrip kits" listed in the previous section. Great for ambulance, hearse, etc. For cement-on or nylon fastener applications. Available with or without molded in clips. Compare your original seal profile to the sketch. Sold by the foot.

PART #12-016X (without clips)
$3.90 / ft.

PART #12-017X (with clips)
$4.80 / ft.

Weatherstrip, Door Edge. Use this seal if we do not have an exact match for your model in the "door weatherstrip kits" listed in the previous section. Great for ambulance, hearse, etc. For cement-on or nylon fastener applications. Available with or without molded in clips. Compare your original seal profile to the sketch. Sold by the foot.

PART #12-014X (without clips)
$3.50 / ft.

PART #12-015X (with clips)
$4.90 / ft.

Door Lock Pillar Seals. These weatherstrip's are normally used to seal the bottom edge of a quarter or rear side window on the lock pillar of the body. These fillers will have a metal core if required for proper operation.

Bumper, Door Edge, twin retainer style. 13/16" long x 1/2 " tall x 3/8 " thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models as required

PART #12-006B
$2.25 ea.

Bumper, Door Edge, twin retainer style. 15/16" long x 3/8" tall x 1/2" thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models as required

PART #12-005B
$2.25 ea.

Seal, Door Bottom Drain Hole. Held in place by two "carrot" type retainers. Replaces original GM part #4489247.

• All models

PART #12-005X
$3.00 ea.

Gasket, Door Handle. Four piece kit for two handles. Replaces original GM part #9829900 & #9831512.

• All models

PART #12-008P
$6.80 / kit

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

• All models

PART #12-009P
$1.10 ea.

Weatherstrip, Deck Lid/Trunk. Excellent quality rubber sponge, more durable than original. 18' Strip.

• All models

PART #16-004T
$19.00 ea.

Click to ENLARGE

Gasket, Trunk Emblem / Escutcheon. Die cut to original GM specifications.

• All models except DeVille & Calais

PART #17-013P
$6.00 ea.

Trunk Liner, loose weave. Black with scattered white threads. 54" wide. Sold by the foot

• All models

PART #17-001X
$9.75 / ft.

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

• All models

PART #12-009P
$1.10 ea.

Click to ENLARGE

Carpet Yardage. For use on door panels, kick panels, and rear deck. Order with our custom molded carpet kit for a perfect match. Available in many colors. 80" wide, sold by the yard.

Click here for available colors

• All models

PART #CALL TO SPECIFY COLOR & STYLE
$49.95 / yard

Click to ENLARGE

Carpet Sound Deadener / Heat Shield. Single sided heat shield / sound deadener, foil backed. Sold in 4' x 6' sheets.

• All models

PART #17-029Z
$48.95 / sheet

Click to ENLARGE

Carpet Padding / Insulation. High quality felt padding. 72" wide, sold by the yard.

• All models

PART #17-030Z
$7.50 / yard

Bumper, Glove Box Door. For 1/8" to 5/32" hole, 5/32" thick pad, 5/16" diameter.

• Many models, as required

PART #18-001B
$0.80 ea.

Bumper, Glove Box Door. For 1/8" to 5/32" hole, 1/4" thick pad, 5/16" diameter.

• Many models, as required

PART #18-002B
$0.80 ea.

Bumper, Bench Seat. Made with steel core like original. 1-1/2" long, 7/16" thick. 2-4 Required per vehicle. These bumpers can be seen when you push the front seat forward to access the rear seat.

• All 2 door models w/ bench seat

PART #18-006B
$5.00 ea.

Grommet, Sun Visor Rod. Made of gray rubber, 3/4" long.

• All models

PART #18-006X
$1.75 ea.

Trip Meter Reset Knob . UNIVERSAL type made of black rubber. 1/8" I.D., 7/16" O.D. X 1/2" tall.

• All models

PART #18-007X
$5.00 ea.

Grommet, Dimmer Switch for carpet application, 2-3/4" O.D., wide flange for stitching, 1" hole for dimmer switch.

• Closed bodies, many models

PART #18-001G
$7.30 ea.

Grommet, Instrument Panel to Windshield Frame. 2-6 required. Replaces original GM part #4614412.

• All Fleetwood Sedan and Limo

PART #18-005G
$5.90 ea.

Click to ENLARGE

Flat Speed Nut. Used on most models for many applications.

U-Nut. Used on most models for many applications.

Pal Nut W/ Sealer. Used to attach various trim, badges, & name plates. Special rubber sealer on backside as original. Used on most models for many applications.

Click to ENLARGE

Fastener, Window Crank. 5/16" inside gap by 3/4" wide.

• All models

PART #19-028F
$0.40 ea.

Clip, Hood to Cowl Weatherstrip. Replaces original GM part #480534. Normal usage is 14 to 16 per car as needed. 3/4" tall with a 1"wide head.

• All models

PART #04-101F
$0.60 ea.

3M™ Adhesive Remover. Quickly removes wax, grease, oil and adhesive residue. It will not harm most cured automotive paints and is also suitable for vinyl and glass surfaces. 8 oz. can.

PART #23-002X
$13.00 / 8 oz. can

3M™ Super Weatherstrip Adhesive (BLACK) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, headliners, and side panels in place. 5 oz. tube.

PART #23-003X
$11.00 / 5 oz. tube

3M™ Super Weatherstrip Adhesive (YELLOW) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, vinyl headliners, and side panels in place. 5 oz. tube.

PART #23-001X
$11.00 / 5 oz. tube