Motor Mount, front right & left.

• Eldorado

PART #05-008X
$40.00 / pair

Motor Mount, front right & left.

• All models except : Eldorado & Seville

PART #05-006X
$45.00 / pair

Transmission Mount. Replaces original GM part # 3633087 .

• All models except : Eldorado

PART #05-005X
$29.00 ea.

Click to ENLARGE

Decal, Air Cleaner, "Keep Your GM All GM." Replaces original GM part #8995195. For filter type A332C.

• All models using air filter A332C

PART #DA0110
$5.25 ea.

Click to ENLARGE

Key Blank, W/ Cadillac Logo, Glove box, Door, & Trunk. Original GM part #7024237. This is a GM original part - New Old Stock (NOS) - limited supply. Used for trunk, door, and Glove box. Keyway "D."

• All models

PART #06-014Y
$12.75

Click to ENLARGE

Key Blank, W/ Cadillac Logo, Ignition. Original GM part #7024231. This is a GM original part - New Old Stock (NOS) - limited supply. Used for ignition. Keyway "C."

• All models

PART #06-013Y
$12.75 each - COMMING SOON

Click to ENLARGE

Cover, Battery Clamp. Control unsightly sulphate build-up & help protect the nearby metal and finish. Available in black or red, sold separate.

PART #06-007X (black)
$8.00 ea.

PART #06-013X (red)
$8.00 ea.

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch.

• All models

PART #06-002P
$5.60 ea.

Splash Apron Set. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arm, and inside inner fenders. 4 piece kit. Installation clips included.

• All models except : Eldorado & Seville

PART #03-111M
$65.00 / kit

Splash Apron Set. Die cut from original style black masticated rubber for a factory fit. Pieces fit over a-arm, and inside inner fenders. Two piece kit. Installation clips included.

• Seville only

PART #03-157M
$54.99 / pair

Splash Apron Set. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arms, and inside inner fenders. 6 piece kit. Installation clips included.

• Eldorado

PART #03-110M
$49.99 / kit

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

A: Control Arm Shaft & Bushings, front upper, driver or passenger side, 2 kits required per car. Available with or without shaft.

B: Control Arm (Rebound) Bumper - NOT AVAILABLE

C: Ball Joint, front upper.

D: Camber Eccentric, passenger or driver side, 2 required per car.

E: Spring Insulator Cushion - NOT AVAILABLE

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

F: Control Arm Bushings, front lower, driver or passenger side, 2 required per car.

G: Shock Bushing - NOT AVAILABLE

H: Lower Arm Bumper - NOT AVAILABLE

I: Ball Joint, front lower, driver or passenger side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

K: Stabilizer End Kit, 22 piece, 1 kit required per car.

L: Stabilizer/Sway Bar to Frame Bushing, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

J: Strut Rod Bushing Kit, 1 kit required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

M: Center Link

N: Outer Tie Rod End, passenger or driver side, 2 required per car.

O: Inner Tie Rod End, passenger or driver side, 2 required per car.

P: Tie Rod Sleeve, passenger or driver side, 2 required per car.

Clip, Hood to Cowl Weatherstrip. Replaces original GM part #480534. Normal usage is 14 to 16 per car as needed. 3/4" tall with a 1"wide head.

• All models

PART #04-101F
$0.60 ea.

Click to ENLARGE

Bumper, Hood Side to Fender. Mounts to fender. Four required per car. Replaces original GM part #1498726

• All models

PART #04-142B
$3.15 ea.

Click to ENLARGE

Bumper Cap, Front Hood Adjuster. Slips over the adjustable bolt for the hood.  Nice reproductions.  Caps are approx. 1-1/16" diameter, 11/16" tall.  Will slip over 1/2" to 7/8" head.

• All models

PART #04-140B
$3.40 ea.

Bumper, Front Hood Adjuster, 2 3/8" tall with 1 1/8" diameter head. Replaces original GM part # 400765.

• Some models as required

PART #04-104B
$5.40 ea.

Hood to Cowl Seal. Correct rubber extrusion replacement for original GM part #9886375, #9873794, or #1498724.

• All models

PART #04-113C
$24.80 ea.

Rear Quarter Window Leading Edge Seal. These weatherstrip's will have a metal core if required for proper operation.

Sometimes called “window fuzzies” or “sweepers,” the beltline weatherstrip runs horizontally along the tops of the doors and rear quarter areas. The inner beltline typically attach to the top of the door panels. The outer beltline typically attach to the top of the door behind the trim.

The following kits are pre-cut and pre-formed to the size & contour of your vehicle. All fastener holes or attaching tabs are in place and any necessary fasteners will be included. No modifications are necessary.

If your models is not listed in the table below, please see the next group of parts.

The following parts are the correct original GM material, but will require you to cut to fit yourself. Some modifiactions will be necessary.

Convertible Roof Rail Weatherstrip. The roof rail is the section typically over the side and rear quarter windows when the top is up. The roof rail kit contains 5 pieces, including the front bow seal. The hinge pillar section is the weatherstrip typically between the windshield post and the front door opposite the vent window. The hinge pillar kit contains 2 pieces, pair, L & R. Roof rail & hinge pillar its are sold separately.

Hardtop Roof Rail Seals. The roof rail seals seal the tops of the windows to the body. Made with molded ends to factory specifications for an exact fit.

Weatherstrip, Front Bow to Windshield. Included in convertible roof rail kit #11-146R listed above. Replaces original GM part # 9833656 .

• Eldorado convertible

PART #13-003X
$49.00 ea.

Door Weatherstrip, pair left and right. High quality reproductions made with molded ends and clips as required. If you do not see your model listed in this section, please refer to our "Door Seals By the Foot" in the next section.

Door Lock Pillar Seals. These weatherstrip's are normally used to seal the bottom edge of a quarter or rear side window on the lock pillar of the body. These fillers will have a metal core if required for proper operation.

Bumper, Door Edge, twin retainer style. 13/16" long x 1/2 " tall x 3/8 " thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models as required

PART #12-006B
$2.25 ea.

Bumper, Door Edge, twin retainer style. 15/16" long x 3/8" tall x 1/2" thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models as required

PART #12-005B
$2.25 ea.

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

• All models

PART #12-009P
$1.10 ea.

Gasket, Door Handle. Replaces original GM part #9829900 & #9831512. Four piece kit for 2 handles.

• All models

PART #12-008P
$6.80 / kit

Weatherstrip, Deck Lid/Trunk. Excellent quality rubber sponge, more durable than original. 18' Strip.

• All models

PART #16-004T
$19.00 ea.

Gasket, Trunk Emblem / Escutcheon. Die cut to original GM specifications.

• All models except Seville & Eldorado

PART #17-013P
$6.00 ea.

Trunk Liner, loose weave. Black with scattered white threads. 54" wide. Sold by the foot.

• All models

PART #17-001X
$9.75 / ft.

Click to ENLARGE

Carpet Yardage. For use on door panels, kick panels, and rear deck. Order with our custom molded carpet kit for a perfect match. Available in many colors. 80" wide, sold by the yard.

Click here for available colors

• All models

PART #CALL TO SPECIFY COLOR & STYLE
$49.95 / yard

Click to ENLARGE

Carpet Sound Deadener / Heat Shield. Single sided heat shield / sound deadener, foil backed. Sold in 4' x 6' sheets.

• All models

PART #17-029Z
$48.95 / sheet

Click to ENLARGE

Carpet Padding / Insulation. High quality felt padding. 72" wide, sold by the yard.

• All models

PART #17-030Z
$7.50 / yard

Bumper, Bench Seat. Made with steel core like original. 1-1/2" long, 7/16" thick. 2-4 Required per vehicle. These bumpers can be seen when you push the front seat forward to access the rear seat.

• All 2 door models w/ bench seat

PART #18-006B
$5.00 ea.

Grommet, Sun Visor Rod. Made of gray rubber, 3/4" long.

• All models

PART #18-006X
$1.75 ea.

Trip Meter Reset Knob . UNIVERSAL TYPE made of black rubber. 1/8" I.D., 7/16" O.D. X 1/2" tall.

• All models

PART #18-007X
$5.00 ea.

Click to ENLARGE

Flat Speed Nut. Used on most models for many applications.

Click to ENLARGE

U-Nut. Used on most models for many applications.

Pal Nut W/ Sealer. Used to attach various trim, badges, & name plates. Special rubber sealer on backside as original. Used on most models for many applications.

Click to ENLARGE

Fastener, Window Crank. 5/16" inside gap by 3/4" wide.

• All models

PART #19-028F
$0.40 ea.

Clip, Multi-Purpose. Many applications. Identical to original GM clips.

• Many models

PART #19-011F
$0.35 ea.

Clip, Multi-Purpose. Many applications. Identical to original GM clips.

• Many models

PART #19-003F
$0.85 ea.

Clip, Hood to Cowl Weatherstrip. Replaces original GM part #480534. Normal usage is 14 to 16 per car as needed. 3/4" tall with a 1"wide head.

• All models

PART #04-101F
$0.60 ea.

3M™ Adhesive Remover. Quickly removes wax, grease, oil and adhesive residue. It will not harm most cured automotive paints and is also suitable for vinyl and glass surfaces. 8 oz. can.

PART #23-002X
$13.00 / 8 oz. can

3M™ Super Weatherstrip Adhesive (BLACK) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, headliners, and side panels in place. 5 oz. tube.

PART #23-003X
$11.00 / 5 oz. tube

3M™ Super Weatherstrip Adhesive (YELLOW) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, vinyl headliners, and side panels in place. 5 oz. tube.

PART #23-001X
$11.00 / 5 oz. tube