Motor Mount, front right & left.

• Eldorado

PART #05-008X
$40.00 / pair

Motor Mount, front right & left.

• All models except : Eldorado & Seville

PART #05-003X
$22.00 / pair

Transmission Mount.

• All models except : Eldorado & Seville

PART #05-004X
$20.00 ea.

Click to ENLARGE

Cover, Battery Clamp. Control unsightly sulphate build-up & help protect the nearby metal and finish. Available in black or red, sold separate.

PART #06-007X (black)
$8.00 ea.

PART #06-013X (red)
$8.00 ea.

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch.

• All models

PART #06-002P
$5.60 ea.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

A: Control Arm Shaft & Bushings, front upper, driver or passenger side, 2 kits required per car. Available with or without shaft.

B: Control Arm (Rebound) Bumper - NOT AVAILABLE

C: Ball Joint, front upper. DRIVER SIDE (LEFT SIDE) OR PASSENGER SIDE (RIGHT SIDE)

D: Camber Eccentric - NOT AVAILABLE

E: Spring Insulator Cushion - NOT AVAILABLE

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

F: Control Arm Bushings, front lower, driver or passenger side, 2 required per car.

G: Shock Bushing - NOT AVAILABLE

H: Lower Arm Bumper - NOT AVAILABLE

I: Ball Joint, front lower, driver or passenger side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

K: Stabilizer End Kit, 22 piece, 1 kit required per car.

L: Stabilizer/Sway Bar to Frame Bushing, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

M: Center Link

N: Outer Tie Rod End, passenger or driver side, 2 required per car.

O: Inner Tie Rod End, passenger or driver side, 2 required per car.

P: Tie Rod Sleeve, passenger or driver side, 2 required per car.

Clip, Hood to Cowl Weatherstrip. Replaces original GM part #480534. Normal usage is 14 to 16 per car as needed. 3/4" tall with a 1"wide head.

• All models

PART #04-101F
$0.60 ea.

Hood to Cowl Seal. Correct rubber extrusion replacement for original GM part #9886375, #9873794, or #1498724.

• All models

PART #04-113C
$24.80 ea.

Splash Apron Set. Die cut from original style black masticated rubber for a factory fit. Pieces fit over a-arm, and inside inner fenders. 2 piece kit.

• All models except : Eldorado & Seville

PART #03-112M
$25.00 / pair

Splash Apron Set. Die cut from original style black masticated rubber for a factory fit. Pieces fit over a-arm, and inside inner fenders. Two piece kit.

• Seville only

PART #03-157M
$54.99 / pair

Splash Apron Set. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arms, and inside inner fenders. 6 piece kit.

• Eldorado only

PART #03-110M
$49.99 / kit

Hardtop Roof Rail Seals. The roof rail seals seal the tops of the windows to the body. Made with molded ends to factory specifications for an exact fit.

Door Weatherstrip, pair left and right. High quality reproductions made with molded ends and clips as required.

Bumper, Door Edge, twin retainer style. 13/16" long x 1/2 " tall x 3/8 " thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models as required

PART #12-006B
$2.25 ea.

Bumper, Door Edge, twin retainer style. 15/16" long x 3/8" tall x 1/2" thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models as required

PART #12-005B
$2.25 ea.

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

• All models

PART #12-009P
$1.10 ea.

Gasket, Door Handle. Replaces original GM part #9829900 & #9831512. Four piece kit for 2 handles.

• All models

PART #12-008P
$6.80 / kit

Trunk Liner, loose weave. Black with scattered white threads. 54" wide. Sold by the foot.

• All models

PART #17-001X
$9.75 / ft.

Bumper, Bench Seat. Made with steel core like original. 1-1/2" long, 7/16" thick. 2-4 Required per vehicle. These bumpers can be seen when you push the front seat forward to access the rear seat.

• All 2 door models w/ bench seat, possibly others

PART #18-006B
$5.00 ea.

Grommet, Sun Visor Rod. Made of gray rubber, 3/4" long.

• All models

PART #18-006X
$1.75 ea.

Trip Meter Reset Knob. UNIVERSAL type made of black rubber. 1/8" I.D., 7/16" O.D. X 1/2" tall.

• Some models

PART #18-007X
$5.00 ea.

1/4-20 U-Nut. Used on most models for many applications.

• All models

PART #19-012F
$0.65 ea.

Clip, Multi-Purpose. Many applications. Identical to original GM clips.

• Many models

PART #19-011F
$0.35 ea.

Clip, Multi-Purpose. Many applications. Identical to original GM clips.

• Many models

PART #19-003F
$0.85 ea.

Clip, Hood to Cowl Weatherstrip. Replaces original GM part #480534. Normal usage is 14 to 16 per car as needed. 3/4" tall with a 1"wide head.

• All models

PART #04-101F
$0.60 ea.

3M™ Adhesive Remover. Quickly removes wax, grease, oil and adhesive residue. It will not harm most cured automotive paints and is also suitable for vinyl and glass surfaces. 8 oz. can.

PART #23-002X
$13.00 / 8 oz. can

3M™ Super Weatherstrip Adhesive (BLACK) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, headliners, and side panels in place. 5 oz. tube.

PART #23-003X
$11.00 / 5 oz. tube

3M™ Super Weatherstrip Adhesive (YELLOW) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, vinyl headliners, and side panels in place. 5 oz. tube.

PART #23-001X
$11.00 / 5 oz. tube