Rear of Door Flipper Stop, Replaces GM #4650270 & #4642858 for 1954-58 Buick, Chevrolet, Oldsmobile & Pontiac 2-Door Hardtops
Buick: 1954-56 Century / Special & 1957-58 Super / Roadmaster & 1958 LimitedChevy: 1955-57 Two-Ten Series / Bel AirOldsmobile: 1954-56 88 / 98 / Super 88Pontiac: 1955-57 Chieftain / Star Chief & 1957 Super ChiefFITMENT NOTE: For 2 Door Hardtop Models Only
Description
Rear of door flipper stop pair, right and left, for 1954-58 Buick, Chevrolet, Oldsmobile and Pontiac 2-door hardtops. Replaces GM #4650270 and #4642858.
Check first: These stops mount at the very rear of the door flipper assembly, inside the flipper opening at the back of both the right and left flipper seals on the roof rail. They are held by the rearmost flipper screw, and mounting hardware is not included. This pair fits the 2-door hardtop models listed below only, so check your make, model and year, or call us if you are not sure about your car.
Finish the flipper the way GM did. A missing, hardened or crushed rear flipper stop leaves the end of the flipper seal open, and the seal can shift or let in wind and water at the rear of the door. This reproduction is made from the original part, so the stop sits in the flipper opening for an exact fit.
What's included
- 2 rear of door flipper stops, right and left (one pair)
- Mounting hardware not included
Details
- Replaces original GM part numbers 4650270 and 4642858
- Mounts inside the flipper opening at the rear of the door flipper assembly, at the rear of both right and left flipper seals
- Secured by the rearmost flipper screw, with the tab facing in as the opening faces out
- Made from high quality, weather & UV resistant EPDM materials for maximum longevity - will not fade, crack or shrink, with a brass metal core for durability
- Designed from the original part for an exact fit, made in the USA
- Sold as a pair, right and left
Models listed
Buick
- 1954-56: Century, Special 2-door hardtop
- 1957-58: Super, Roadmaster 2-door hardtop
- 1958: Limited 2-door hardtop
Chevy
- 1955-57: Two-Ten Series, Bel Air 2-door hardtop
Oldsmobile
- 1954-56: 88, 98, Super 88 2-door hardtop
Pontiac
- 1955-57: Chieftain, Star Chief 2-door hardtop
- 1957: Super Chief 2-door hardtop
**Check the “Matching Vehicles” box on this page to confirm your car, or call (866) 789-7879 (Mon-Fri, 8am-4pm PST).
**All parts sold by Rubber the Right Way are backed by our 100% satisfaction guarantee! Learn more.

Common questions
Where does it mount?
Inside the flipper opening at the very rear of the door flipper assembly, at the rear of the right and left flipper seals on the roof rail. It is held by the rearmost flipper screw.
Which way does it face?
The tab faces in as the opening faces out.
Is hardware included?
No. Mounting hardware is not included.
Which cars does it fit?
1954-58 Buick, Chevrolet, Oldsmobile and Pontiac 2-door hardtops listed above.
Will it fit a sedan, convertible or 4-door hardtop?
No. This pair is listed for 2-door hardtops only. Check the Matching Vehicles box or call us if you are unsure.
Which GM part numbers does it replace?
GM #4650270 and #4642858.
What is it made from?
Weather and UV resistant EPDM rubber with a brass metal core.
Details
- 10-075X
- 10-075X
- Steele Rubber
- / pair
- New
Categories
- Buick - 1954 - Windows
- Buick - 1955 - Windows
- Buick - 1956 - Windows
- Buick - 1957 - Windows
- Buick - 1958 - Windows
- Chevy - 1955 - Windows
- Chevy - 1956 - Windows
- Chevy - 1957 - Windows
- Oldsmobile - 1954 - Windows
- Oldsmobile - 1955 - Windows
- Oldsmobile - 1956 - Windows
- Pontiac - 1955 - Windows
- Pontiac - 1956 - Windows
- Pontiac - 1957 - Windows
- Products - Windows
Shipping Information
- Item Requires Shipping
- 0.0 lbs.
- W1.5000” x H1.0000” x L1.5000”
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!